BRENHAM, TX —
OSHA Inspection: JIMMIE HAHN INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of JIMMIE HAHN INC. in 1503 NORTH PARK STREET, BRENHAM, TX 77833 (NAICS 327320). OSHA activity number 340473602.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JIMMIE HAHN INC.
- Site address
- 1503 NORTH PARK STREET
- City
- BRENHAM
- State
- TX
- ZIP
- 77833
- Mailing
- 1503 NORTH PARK STREET, BRENHAM, TX 77833
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327320
- Employees
- 25
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.212 A05
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.212(a)(5): Fan blades were not guarded. On or about 13 March 2015, a fan that was located in the truck maintenance shop area was not guarded exposing employees to hazards of being caught in the rotating blades.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.303 B07 I
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in the boxes were not effectively closed. On or about 13 March 2015, the employer did not ensure that all unused breaker slots in the emergency fuel shut off switch were closed, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.305 B01 II
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in cabinets, boxes, and fittings shall be effectively closed. On or about 13 March 2015, the employer did not ensure that all unused openings in the welder disconnect were closed, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B07 IV
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There were damaged parts that may adversely affect safe operation or mechanical strength of electric equipment. On or about 13 March 2015, the top socket of a of a two(2) plug electrical outlet located in the truck maintenance shop was damaged, live, and had not been repaired by the employer, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.334 A02 I
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use for external defects. On or about 13 March 2015, the employer did not inspect and repair a damaged electrical cord being used to power equipment in the maintenance shop, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 A02 IX
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(ix): All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard. On or about 13 March 2015, the employer did not ensure that fluorescent lights in the maintenance shop were guarded, exposing employees to the hazards of being struck by broken glass.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1904.32 B03
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $400 · Current $240 Reduced
General-duty citation text
29 CFR 1904.32(b)(3): A company executive did not certify that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete. On or about 13 March 2015, the annual summary of the work related injury and illnesses were signed by the Payroll Administrator instead of the highest ranking official, for years 2012,2013 and 2014.
Recent events (2)
- — I (O) $240
- — Z (O) $400
1910.179 B05
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $500 · Current $300 Reduced
General-duty citation text
29 CFR 1910.179(b)(5): A crane's rated load shall be checked thoroughly by a qualified engineer or the equipment manufacturer; and shall be tested up to 125 percent of the rating. On or about 13 March 2015, the employer did not conduct load testing on a job assembled crane that was located in the truck maintenance shop. The crane did not have a load rating, exposing employees to the hazard of being struck by falling objects.
Recent events (2)
- — I (O) $300
- — Z (O) $500
1910.212 A01
- Issued
- Jul 17, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $500 · Current $300 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. On or about 13 March 2015, the rotating chuck on the Eagle Power Tool Heavy Duty Drill Press was not guarded, exposing employees to hazards such as those created by being caught in the rotating drill.
Recent events (2)
- — I (O) $300
- — Z (O) $500
More inspections at Jimmie Hahn INC.
View Jimmie Hahn INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327320)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340473602.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.