CHAMPAIGN, IL —
OSHA Inspection: GREEN PURPOSE, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GREEN PURPOSE, LLC in 808 PIONEER STREET, CHAMPAIGN, IL 61820 (NAICS 423930). OSHA activity number 340473917.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREEN PURPOSE, LLC
- Site address
- 808 PIONEER STREET
- City
- CHAMPAIGN
- State
- IL
- ZIP
- 61820
- Mailing
- 808 PIONEER STREET, CHAMPAIGN, IL 61820
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 C01
- Issued
- Jun 4, 2015
- Abate by
- Jun 16, 2015
- Penalty
- Initial $2,400 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent): Green Purpose, LLC had an employee exposed to 50 in. fall hazards without fall protection from a standard railing or an equivalent means of fall protection, while standing on the baler and carrying out work duties.
Recent events (2)
- — I (S) $1200
- — Z (S) $2400
1910.178 L01 I
- Issued
- Jun 4, 2015
- Abate by
- Jun 16, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): Green Purpose, LLC had an employee operate a powered industrial truck daily, and the employer did not provide powered industrial truck operator training, as specified by paragraph (l). This training would include the following: a. Formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), b. Practical training (demonstrations performed by the trainer and practical exercises performed by the trainee) and, c. Evaluation of the operator's performance in the workplace.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.178 L06
- Issued
- Jun 4, 2015
- Abate by
- Jun 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): Green Purpose, LLC had an employee operate a powered industrial truck, and the employer did not certify that the employee had received training and evaluation as specified by 1910.178(l). This certification would include: a. Name of the operator, b. Date of the training, c. Date of the evaluation, and d. Identity of the person(s) performing the training or evaluation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Jun 4, 2015
- Abate by
- Jun 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: Green Purpose, LLC had an employee operate powered industrial trucks on a daily basis, and the employer did not conduct daily powered industrial truck inspections.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jun 4, 2015
- Abate by
- Jun 10, 2015
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Green Purpose, LLC had an employee operate a horizontal baler, and the horizontal baler had three manufactured emergency stops, as part of the machine guarding system of the equipment to prevent employee exposure to crushing and amputation hazards. The employer had only 1 functional emergency stop of the three manufactured emergency stops.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
More inspections in this industry (NAICS 423930)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340473917.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.