Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CAPITAL CITY SHEET METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CAPITAL CITY SHEET METAL, INC. in 4938 FEMRITE DRIVE, MADISON, WI 53716 (NAICS 238170). OSHA activity number 340478114.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Capital City Sheet Metal, INC. — free Get an email when a new federal OSHA severe-injury report for Capital City Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4938 FEMRITE DRIVE
City
MADISON
State
WI
ZIP
53716
Mailing
4938 FEMRITE DRIVE, MADISON, WI 53716
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
10
Ownership type
A

5 citations on file for this inspection.

1926.451 B01

Serious Gravity 5 4 instances 1 exposed
Issued
Apr 15, 2015
Abate by
Apr 23, 2015
Penalty
Initial $2,200 · Current $1,540 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):  On or about March 19, 2015, employees working from a fabricated steel frame scaffolding system installing metal siding were doing so with the scaffold working level not fully planked / decked.
Recent events (2)
  • — I (S) $1540
  • — Z (S) $2200

1926.451 C02

Serious Gravity 5 18 instances 1 exposed
Issued
Apr 15, 2015
Abate by
Apr 23, 2015
Penalty
Initial $2,200 · Current $1,540 Reduced
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates, mud sills or other adequate firm foundation:  On or about March 19, 2015, employees working from a fabricated steel frame scaffolding system were doing so without the utilization of mud sills.
Recent events (2)
  • — I (S) $1540
  • — Z (S) $2200

1926.451 E01

Serious Gravity 1 4 instances 1 exposed
Issued
Apr 15, 2015
Abate by
Apr 23, 2015
Penalty
Initial $1,320 · Current $924 Reduced
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.    On or about March 19, 2015, employees accessing the elevated working level of a fabricated steel frame scaffolding system via the scaffold frames were doing so with an access height greater than two feet.
Recent events (2)
  • — I (S) $924
  • — Z (S) $1320

1926.451 F03

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 15, 2015
Abate by
Apr 23, 2015
Penalty
Initial $2,200 · Current $1,540 Reduced
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:  On or about March 19, 2015, a fabricated steel frame scaffolding system utilized on site was not inspected by a competent person to verify any defects prior to use.
Recent events (2)
  • — I (S) $1540
  • — Z (S) $2200

1926.451 G01

Serious Gravity 5 4 instances 1 exposed
Issued
Apr 15, 2015
Abate by
Apr 23, 2015
Penalty
Initial $2,200 · Current $1,540 Reduced
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  On or about March 19, 2015, employees working from a fabricated steel frame scaffolding system at a height greater than ten feet installing metal siding were exposed to fall hazards.
Recent events (2)
  • — I (S) $1540
  • — Z (S) $2200

View Capital City Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340478114.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.