WAUKESHA, WI —
OSHA Inspection: THERM-TECH OF WAUKESHA, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of THERM-TECH OF WAUKESHA, INC. in 301 TRAVIS LN, WAUKESHA, WI 53189 (NAICS 332811). OSHA activity number 340480854.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THERM-TECH OF WAUKESHA, INC.
- Site address
- 301 TRAVIS LN
- City
- WAUKESHA
- State
- WI
- ZIP
- 53189
- Mailing
- 301 TRAVIS LN, WAUKESHA, WI 53189
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332811
- Employees
- 150
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.27 A01
- Issued
- Sep 9, 2015
- Abate by
- Oct 5, 2015
- Penalty
- Initial $3,600 · Current $3,240 Reduced
General-duty citation text
29 CFR 1910.27(a)(1): Design considerations. All ladders, appurtenances, and fastenings shall be designed to meet the following load requirements of i-iv of this standard. (a) Employees used a shop made fixed ladder, to inspect portions of the Tumble Blaster, which had not been designed to meet the minimum design live load of 200 pounds.
Recent events (2)
- — I (S) $3240
- — Z (S) $3600
1910.147 C04 II
- Issued
- Sep 9, 2015
- Abate by
- Oct 5, 2015
- Penalty
- Initial $4,500 · Current $4,050 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): (a) The machine specific procedures for the did not clearly and specifically outline the scope, purpose, authorization, rules and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance.
Recent events (2)
- — I (S) $4050
- — Z (S) $4500
1910.147 C06 I
- Issued
- Sep 9, 2015
- Abate by
- Oct 5, 2015
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): Periodic inspection. The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. (a) Where employees work on machines, such as but not limited to the Tumble Blaster, energy control procedures were not reviewed on an annual basis.
Recent events (2)
- — I (S) $0
- — Z (S) $4500
1910.147 D04 I
- Issued
- Sep 9, 2015
- Abate by
- Oct 5, 2015
- Penalty
- Initial $4,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees. (a) The employer did not ensure that employees utilize lockout or tagout devices while performing maintenance activities on machines including but not limited to the Tumble Blaster.
Recent events (2)
- — I (S) $0
- — Z (S) $4500
More inspections at Therm-Tech of Waukesha, INC.
View Therm-Tech of Waukesha, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332811)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340480854.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.