Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,201Inspections Most recent open 2026-08-31 Last loaded 2026-09-03

OSHA Inspection: MANUEL CRUZ VALENZUELA

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of MANUEL CRUZ VALENZUELA in INTERSECTION OF CUMBERLAND ROAD AND 205TH STREET, ELKHORN, NE 68022 (NAICS 238140). OSHA activity number 340482082.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Manuel Cruz Valenzuela for free Get an email when a new federal OSHA severe-injury report for Manuel Cruz Valenzuela is published. One employer, no account, unsubscribe in one click.
Site address
INTERSECTION OF CUMBERLAND ROAD AND 205TH STREET
City
ELKHORN
State
NE
ZIP
68022
Mailing
4917 S. 42ND STREET, OMAHA, NE 68107
Inspection type
Programmed Related (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
Private (A)

6 citations on file for this inspection.

1926.451 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 8, 2015
Abate by
Oct 9, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(b)(1):   Each platform on all working levels of scaffolds was not fully planked or decked between front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):  Worksite located at the intersection of Cumberland Road and 205th Streets, Elkhorn, NE:  The working level of a scaffold was not fully planked which decreases the working area for the employees.  They were exposed to falls of over 12 feet.     Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • · Z (S) $2800

1926.451 C02

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 8, 2015
Abate by
Oct 9, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(c)(2):   Supported scaffold poles, legs, posts, frames, and uprights did not bear on base plates and mud sills or other adequate firm foundation:     Worksite located at the intersection of Cumberland Road and 205th Streets, Elkhorn, NE:  A fabricated frame scaffold located at the site did not have base plates installed at each lower frame location.  This increases the potential for shifting of the scaffold while in use and possible collapse.      Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • · Z (S) $2800

1926.451 E01

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 8, 2015
Abate by
Oct 9, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(e)(1):   When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.   Worksite located at the intersection of Cumberland Road and 205th Streets, Elkhorn, NE:  The fabricated frame scaffold observed at the job site was not constructed with an acceptable scaffold access method that meets the requirements listed above.        Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • · Z (S) $2800

1926.451 F03

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 8, 2015
Abate by
Oct 9, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(f)(3):   Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:  Worksite located at the intersection of Cumberland Road and 205th Streets, Elkhorn, NE:  The fabricated frame scaffold observed at the job site had multiple defects (lack of guardrails, incomplete decking, missing base plates, and a bent cross brace) that should have been detected through inspections conducted prior to each work shift.        Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • · Z (S) $2800

1926.451 G04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 8, 2015
Abate by
Oct 9, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(g)(4)(i):   Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews:  Worksite located at the intersection of Cumberland Road and 205th Streets, Elkhorn, NE:  The employer failed to ensure that guardrails were installed on a fabricated frame scaffold.  The employees were exposed to falls of greater than 12 feet while working.      Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • · Z (S) $2800

1926.454 A

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 8, 2015
Abate by
Oct 9, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.454(a):   The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.   Worksite located at the intersection of Cumberland Road and 205th Streets, Elkhorn, NE as well as throughout the company:  Employees working a fabricated frame scaffold had not received training as required by the standard.  This training should include but is not limited to the hazards associated with the type of scaffold being used.      Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • · Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340482082.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.