ARLINGTON, TX —
OSHA Inspection: SHIOLENO INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SHIOLENO INDUSTRIES, INC. in 1715 N. PEYCO DRIVE, ARLINGTON, TX 76001 (NAICS 337215). OSHA activity number 340482686.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHIOLENO INDUSTRIES, INC.
- Site address
- 1715 N. PEYCO DRIVE
- City
- ARLINGTON
- State
- TX
- ZIP
- 76001
- Mailing
- 1715 N. PEYCO DRIVE, ARLINGTON, TX 76001
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 110
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.184 H05
- Issued
- Jul 28, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $5,400 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.184(h)(5): Removal from service. Natural and synthetic fiber rope slings shall be immediately removed from service if any of the following conditions are present such as broken or cut fibers: In the Welding Shop, the employees were using a 2 foot wide synthetic fiber sling that was severely cut and frayed exposing employees to the hazard of being struck by the load.
Recent events (2)
- — I (S) $2700
- — Z (S) $5400
1910.212 A01
- Issued
- Jul 28, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: In the machine shop, the employer did not provide a guard over the Continental horizontal band saw exposing employees to amputation hazards from the unused portion of the saw blade.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.215 B09
- Issued
- Jul 28, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: In the welding department, the right tongue guard was not adjusted properly on the Baldor 6" HR Bench Grinder exposing employees to the hazard of being struck by the wheel.
Recent events (2)
- — I (S) $1800
- — Z (S) $3600
1910.243 C03
- Issued
- Jul 28, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: In the machine shop, a guard was not installed over the 4 1/2" abrasive wheel on the Dewalt right hand angle grinder, serial number 427788, exposing employees to the hazard of being struck by the wheel.
Recent events (2)
- — I (S) $1800
- — Z (S) $3600
1910.303 G01 I
- Issued
- Jul 28, 2015
- Abate by
- Aug 25, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i): Work space was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: In the production area, the electrical control panels were blocked by piles of scrap metal, a Do-All floor fan, a storage table and did not have a 30 inch clearance exposing employees to electrical shock and fire hazards while accessing the panel boxes in an emergency shut off.
Recent events (2)
- — I (S) $1800
- — Z (S) $3600
More inspections at Shioleno Industries, INC.
View Shioleno Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340482686.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.