BUFFALO, NY —
OSHA Inspection: AL-WIL AUTO SUPPLY
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of AL-WIL AUTO SUPPLY in 261 MANHATTAN AVENUE, BUFFALO, NY 14214 (NAICS 423120). OSHA activity number 340488295.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AL-WIL AUTO SUPPLY
- Site address
- 261 MANHATTAN AVENUE
- City
- BUFFALO
- State
- NY
- ZIP
- 14214
- Mailing
- 1711 N. CLINTON AVENUE, ROCHESTER, NY 14621
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- Employees
- 20
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Jun 4, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.134(c)(1): The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer: a) Facility - On or about 03/25/15, the employer required employees to wear 3M-5300 half-face air-purifying respirators with organic vapor cartridges while performing paint mixing. The employer did not establish and implement a written respiratory protection program. ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
- — Z (S) $2000
1910.134 E01
- Issued
- Jun 4, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator. a) Facility - On or about 03/25/15, the employer required employees to wear 3M-5300 half-face air-purifying respirators with organic vapor cartridges while performing paint mixing. Employees were not provided a medical evaluation. ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
- — Z (S) $0
1910.134 F01
- Issued
- Jun 4, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a) Facility - On or about 03/25/15, the employer required employees to wear 3M-5300 half-face air-purifying respirators with organic vapor cartridges while performing paint mixing. Employees were not provided a qualitative fit test (QLFT) or quantitative fit test (QNFT). ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
- — Z (S) $0
1910.1200 E01
- Issued
- Jun 4, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Facility - On or about 03/25/15, the employer did not develop, implement, and/or maintain at the workplace a written hazard communication program. Employees in the facility use hazardous chemicals such as but not limited to Binders and Basemakers which contains 1,2,4-trimethy benzene, Methyl isobutyl ketone, Isobutyl alcohol, Methyl isobutyl ketone, Toluene, and Zylene; and Lacquer Thinners and Cleaning Solvents which contains 1,2,4-trimethy benzene, Acetic acid, Methyl isoamyl ketone, Isopropyl alcohol, Toluene, and Zylene. A written program should include descriptions of how the criteria for: 1. Labeling and other forms of warning; 2. Material Safety Data Sheets such as but not limited to; AND 3. Employee information and training will be met. Additionally, a list of hazardous chemicals known to be present in the workplace must be compiled. Methods used to inform employees of the hazards associated with non routine tasks and the informing of contractors of workplace hazard must also be addressed. The written program must be made available upon request. ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
- — Z (S) $1600
1910.1200 H01
- Issued
- Jun 4, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Facility - On or about 03/25/15, employees working with hazardous chemicals such as, but not limited to Binders and Basemakers which contains 1,2,4-trimethy benzene, Methyl isobutyl ketone, Isobutyl alcohol, Methyl isobutyl ketone, Toluene, and Zylene; and Lacquer Thinners and Cleaning Solvents which contains 1,2,4-trimethy benzene, Acetic acid, Methyl isoamyl ketone, Isopropyl alcohol, Toluene, and Zylene were not provided with information and training on the hazardous materials that they work with. 1. The requirements of this section: 2. Any operations where hazardous chemicals are present; AND 3. The location and availability of the written Hazard Communication Program, list(s) of hazardous chemicals and Material Safety Data Sheets. Employee training shall include at least: 1. Methods and observations that may be used to detect the presence or release of a hazardous chemical in the work area. 2. The physical and health hazards of the chemicals in the work area. 3. The measures employees can take to protect themselves such as specific procedures, appropriate work practices, emergency procedures and personal protective equipment to be used. 4. The details of the employers Hazard Communication Program including an explanation of labeling systems, Material Safety Data Sheets and how employees can obtain and use the appropriate hazard information. ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 423120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340488295.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.