SOMERSET, PA —
OSHA Inspection: EAGLE CONCRETE PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of EAGLE CONCRETE PRODUCTS, INC. in 1019 EAST BAKERSVILLE EDIE ROAD, SOMERSET, PA 15501 (NAICS 327390). OSHA activity number 340489327.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EAGLE CONCRETE PRODUCTS, INC.
- Site address
- 1019 EAST BAKERSVILLE EDIE ROAD
- City
- SOMERSET
- State
- PA
- ZIP
- 15501
- Mailing
- 1019 EAST BAKERSVILLE EDIE ROAD, SOMERSET, PA 15501
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 17
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.23 A02
- Issued
- Apr 23, 2015
- Abate by
- May 19, 2015
- Penalty
- Initial $1,200 · Current $780 Reduced
General-duty citation text
29 CFR 1910.23(a)(2): Ladderway floor opening(s) or platform(s) were not guarded by a standard railing with standard toeboard(s) on all exposed sides (except at the entrance to opening) with passage through the railing either provided with a swinging gate or so offset that a person could walk directly into the opening: (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, employees were exposed to fall hazards of approximately 12 feet from the mixer platform, due to one side of the platform not equipped with a standard railing.
Recent events (2)
- — I (O) $780
- — Z (S) $1200
1910.147 C07 I B
- Issued
- Apr 23, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $2,400 · Current $1,560 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, the employer did not instruct all employees affected by lock out/tag out on the purpose and use of the mixer's energy control procedure.
Recent events (2)
- — I (S) $1560
- — Z (S) $2400
1910.147 C07 IV
- Issued
- Apr 23, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, the employer did not certify and keep up to date that all authorized and affected employees had lock out/tag out training.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Apr 23, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $1,200 · Current $780 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, the employer did not conduct a periodic inspection of the energy control procedures at least annually.
Recent events (2)
- — I (S) $780
- — Z (S) $1200
1910.147 C06 II
- Issued
- Apr 23, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The periodic inspection certification of energy control procedures did not contain the required documentation on identification of the machine or equipment, inspection date, employees included, and the person performing the inspection: (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, the employer did not certify the company completed a periodic inspection of their energy control procedure with a written certification.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D03
- Issued
- Apr 23, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $2,400 · Current $1,560 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, the air line of the mixer was not isolated while employees were working inside the mixer.
Recent events (2)
- — I (S) $1560
- — Z (S) $2400
1910.147 D04 II
- Issued
- Apr 23, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $2,400 · Current $1,560 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(ii): Lockout devices utilized were not affixed in a manner that held the energy isolating device in a safe or off position: (a) Facility- 1019 East Bakersville Edie Road, Somerset, PA: On or about March 25, 2015, lock out devices were not affixed to energy sources in the safe off position while employees were working inside in the mixer.
Recent events (2)
- — I (S) $1560
- — Z (S) $2400
More inspections at Eagle Concrete Products, INC.
View Eagle Concrete Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340489327.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.