Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SOUTHERN SPRING AND STAMPING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SOUTHERN SPRING AND STAMPING, INC. in 401 SUBSTATION ROAD, VENICE, FL 34285 (NAICS 332612). OSHA activity number 340490184.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Southern Spring and Stamping, INC. — free Get an email when a new federal OSHA severe-injury report for Southern Spring and Stamping, INC. is published. One employer, no account, unsubscribe in one click.
Site address
401 SUBSTATION ROAD
City
VENICE
State
FL
ZIP
34285
Mailing
401 SUBSTATION ROAD, VENICE, FL 34285
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332612
Employees
49
Ownership type
A

4 citations on file for this inspection.

1910.215 A04

Serious Gravity 5 2 instances 2 exposed
Issued
Jun 19, 2015
Abate by
Jul 1, 2015
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were either not provided or adjusted closely to the wheel with a maximum opening of one eighth inch:  a) For employees working at 401 Substation Road in Venice, as observed on or about 25 March, 2015. Employees were using 2 bench grinders with tools rests that were either not installed or not adjusted closely to the wheel with a maximum opening of one eighth inch.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 19, 2015
Abate by
Jul 1, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) For employees working at 401 Substation Road in Venice, as observed on or about 25 March, 2015. Employees were using bench grinders without the adjustable tongue and the end of the safety guard peripheral member at the top exceeded one fourth inch above the abrasive wheel.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.242 B

Serious Gravity 10 2 instances 2 exposed
Issued
Jun 19, 2015
Abate by
Jul 1, 2015
Penalty
Initial $4,900 · Current $2,450 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:   a) For employees working at 401 Substation Road in Venice, as observed on or about 25 March, 2015. Employees were using compressed air to clean equipment and clothing that was at a pressure greater than 30 p.s.i. Air pressure that was used was approximately 94 psi.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1904.32 B03

Repeat 1 instance 49 exposed
Issued
Jun 19, 2015
Abate by
Jul 1, 2015
Penalty
Initial $1,400 · Current $700 Reduced
29 CFR 1904.32(b)(3): The 300A annual summary was not certified by a company executive to ensure  that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete.  a) For employees working at 410 Substation Road located in Venice, as observed on or about 25 March, 2015. The OSHA 300A annual summary for 2014 was not signed by a company executive.    The Southern Spring and Stamping Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1904.32(b)(3), which was contained in OSHA inspection number 315081729, citation number 01, item number 1, item number 2, and item number 3 and was affirmed as a final order on 11/22/2010, with respect to a workplace located at 410 Substation Road, Venice, Florida, 34285.
Recent events (2)
  • — I (R) $700
  • — Z (R) $1400

View Southern Spring and Stamping, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340490184.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.