JOHNSTON, RI —
OSHA Inspection: CREATIVE MODELING & DESIGN, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CREATIVE MODELING & DESIGN, LLC in 16 SUNNYSIDE AVENUE, JOHNSTON, RI 02919 (NAICS 339910). OSHA activity number 340496116.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREATIVE MODELING & DESIGN, LLC
- Site address
- 16 SUNNYSIDE AVENUE
- City
- JOHNSTON
- State
- RI
- ZIP
- 02919
- Mailing
- 16 SUNNYSIDE AVENUE, JOHNSTON, RI 02919
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339910
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.217 B04 I
- Issued
- Sep 18, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.217(b)(4)(i): Pedal mechanism(s) on mechanical power press(es) full revolution clutches were not protected to prevent unintended operation from falling or moving objects or by accidental stepping onto the pedals: (a) Mechanical Power Press Area: The foot pedal mechanisms on three presses were not provided with adequate protection to prevent unintended operation.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.217 B06 I
- Issued
- Sep 18, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.217(b)(6)(i): Two hand trip(s) on mechanical power press(es) using full revolution clutches did not have the individual operator's hand controls arranged by design and construction and/or separation to require the use of both hands to trip the press: (a) Mechanical Power Press Area: The two hand trips on the Federal Press number 2 were not adequately arranged in distance so that both hand were needed to trip in that they were 23 inches apart allowing one hand to operate both buttons.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.217 C03 I E
- Issued
- Sep 18, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(c)(3)(i)(e): The location of the hand controls did not allow a safe distance from the point of operation so that the slide completes the downward travel or stops before the operator can reach into the point of operation with his hands: (a) Mechanical Power Press Area: The location of the two hand trip controls on Press number 2 did not allow a safe distance from the point of operation in that they were only 14 1/2 inches from the point of operation and the operator could reach the point of operation during the downward travel of the slide.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 C01 I
- Issued
- Sep 18, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): (a) Mechanical Power Press Area: On or about 03/27/2015, the four mechanical power presses being run in the continuous mode were not provided with adequate point of operation guarding and/or guarding devices.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.217 E01 I
- Issued
- Sep 18, 2015
- Abate by
- Oct 13, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i): A program of periodic and regular inspections of mechanical power press(es) was not established and followed to ensure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: (a) Mechanical Power Press Area: On or about 03/27/2015, the employer had not established nor implemented a program of periodic and regular inspection for all of the mechanical power presses within the establishment.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
More inspections in this industry (NAICS 339910)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340496116.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.