HOMERVILLE, GA —
OSHA Inspection: SEATON CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SEATON CORPORATION in 1601 VALDOSTA HIGHWAY, HOMERVILLE, GA 31634 (NAICS 561320). OSHA activity number 340513753.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SEATON CORPORATION
- Site address
- 1601 VALDOSTA HIGHWAY
- City
- HOMERVILLE
- State
- GA
- ZIP
- 31634
- Mailing
- 1601 VALDOSTA HIGHWAY, HOMERVILLE, GA 31634
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561320
- Employees
- 88
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.217 C01 I
- Issued
- Sep 24, 2015
- Abate by
- Oct 21, 2015
- Penalty
- Initial $7,000 · Current $5,500 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): b) Ammo Department, on or about April 1, 2015 and times prior to, the part revolution, Rousselle punch press did not have any type of safe guarding at the point of operation, thus exposing employees to amputation hazards.
Recent events (3)
- — F (S) $5500
- — C (S) $7000
- — Z (S) $7000
1910.217 F02
- Issued
- Sep 24, 2015
- Abate by
- Oct 21, 2015
- Penalty
- Initial $7,000 · Current $4,250 Reduced
General-duty citation text
29 CFR 1910.217(f)(2): Operator(s) were not trained and instructed in the safe method of work before starting work on mechanical power press(es): a) Press Areas Throughout the Facility - On or about March 25, 2015, and at times prior to, the employer did not ensure that employees operating presses were trained in the safe work methods of operating presses, thus exposing employees to amputation hazards at the point of operation.
Recent events (3)
- — F (S) $4250
- — C (S) $7000
- — Z (S) $7000
1910.219 C02 I
- Issued
- Sep 24, 2015
- Abate by
- Oct 21, 2015
- Penalty
- Initial $5,000 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) Production Area, Ammo wire department, on or about March 31, 2015 and at times prior to, the rotating horizontal shaft on the AM1108 cover link wire form motor was not covered, exposing employees to entanglement and frictional burns.
Recent events (3)
- — F (S) $4000
- — C (S) $5000
- — Z (S) $5000
1910.303 B02
- Issued
- Sep 24, 2015
- Abate by
- Oct 21, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Paint Chain behind B-Line, on or about March 31, 2015 and times prior to, a duplex electrical receptacle designed to be mounted was being used as a pendant to power fans and a parts washer, thus exposing employees to electrical hazards.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.305 B02 I
- Issued
- Sep 24, 2015
- Abate by
- Oct 21, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Behind B-Line Assembly near the Old Maintenance Shop, on or about April 1, 2015, part of the front cover was missing from the 280-volts electrical junction box, exposing employees to electrical hazards.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 561320)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340513753.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.