ROBESONIA, PA —
OSHA Inspection: GENERAL ASPHALT PAVING CO. OF PHILADELPHIA
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GENERAL ASPHALT PAVING CO. OF PHILADELPHIA in 36 NORTH LINDEN STREET, ROBESONIA, PA 19551 (NAICS 237120). OSHA activity number 340515709.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GENERAL ASPHALT PAVING CO. OF PHILADELPHIA
- Site address
- 36 NORTH LINDEN STREET
- City
- ROBESONIA
- State
- PA
- ZIP
- 19551
- Mailing
- 9301 KREWSTOWN ROAD, PHILADELPHIA, PA 19115
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237120
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.300 A
- Issued
- Jun 10, 2015
- Abate by
- Jun 29, 2015
- Penalty
- Initial $3,060 · Current $2,295 Reduced
General-duty citation text
29 CFR 1926.300(a): Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition: a) 36 North Linden Street, Robesonia, PA; Employees were using a Toku Pneumatic Paving Breaker to breakup asphalt while having the stop lever between the throttle lever disabled with electrical tape, on or about 04/06/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2295
- — Z (S) $3060
1926.302 B01
- Issued
- Jun 10, 2015
- Abate by
- Jun 29, 2015
- Penalty
- Initial $3,060 · Current $2,295 Reduced
General-duty citation text
29 CFR 1926.302(b)(1): Pneumatic power tool(s) were not secured to the hose or whip by some positive means to prevent the tool from becoming accidentally disconnected: a) 36 North Linden Street, Robesonia, PA; Employees were using a Toku Pneumatic Paving Breaker without having the tool and hose secured by a positive means in order to prevent the hose from whipping, on or about 04/06/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2295
- — Z (S) $3060
1926.302 B02
- Issued
- Jun 10, 2015
- Abate by
- Jun 29, 2015
- Penalty
- Initial $3,060 · Current $2,295 Reduced
General-duty citation text
29 CFR 1926.302(b)(2): Safety clips or retainers were not securely installed or maintained on pneumatic impact (percussion) tools to prevent attachments from being accidentally expelled: a) 36 North Linden Street, Robesonia; Employees were using a Toku Pneumatic Paving Breaker without having safety pins to prevent attachments from being accidentally expelled, on or about 04/06/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2295
- — Z (S) $3060
1926.20 B04
- Issued
- Jun 10, 2015
- Abate by
- Jun 29, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(4): The employer did not ensure that the employee(s) required to operate equipment and machinery was qualified by training or experience: a) 36 North Linden Street, Robesonia, PA; Employees were not qualified by training or experience to operate a Toku Pneumatic Paving Breaker with an anti-whipping device between the tool and pneumatic supply line, on or about 04/06/2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at General Asphalt Paving CO. of Philadelphia
View General Asphalt Paving CO. of Philadelphia's full OSHA safety record →
More inspections in this industry (NAICS 237120)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340515709.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.