SILVER CREEK, MS —
OSHA Inspection: JOE N. MILES & SONS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOE N. MILES & SONS, INC. in 66 MILES LUMBER CO. RD., SILVER CREEK, MS 39663 (NAICS 321113). OSHA activity number 340522176.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOE N. MILES & SONS, INC.
- Site address
- 66 MILES LUMBER CO. RD.
- City
- SILVER CREEK
- State
- MS
- ZIP
- 39663
- Mailing
- P.O. BOX 158, SILVER CREEK, MS 39663
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 105
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 A08
- Issued
- Aug 7, 2015
- Penalty
- Initial $3,060 · Current $300 Reduced
General-duty citation text
29 CFR 1910.23(a)(8): Floor hole(s), into which persons could accidentally walk, were not guarded by standard railings with standard toeboards on all exposed sides or by floor hole covers of standard strength and construction: (a) Dry Cart - On or about April 7, 2015 a panel was removed from the dry cart floor creating a floor hole measuring 12 inches long, 10.5 inches wide and 25 inches deep.
Recent events (2)
- — I (O) $300
- — Z (S) $3060
1910.265 C18 I
- Issued
- Aug 7, 2015
- Penalty
- Initial $3,825 · Current $3,400 Reduced
General-duty citation text
29 CFR 1910.265(c)(18)(i): Pulley(s), sprocket(s), sheave(s), drum(s) and block(s) of conveyor(s) were not arranged to prevent the possibility of injury due to hands or parts of clothing being caught between the belt(s) and pulley(s) or chain(s) and sprocket(s): (a) Stacker - On or about April 7, 2015 the sprocket for the number 1 chain feed located above the chain feed breaker was not guarded.
Recent events (2)
- — I (S) $3400
- — Z (S) $3825
1910.303 B07 IV
- Issued
- Aug 7, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): Electrical equipment had damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating. (a) Dry Cart - On or about April 7, 2015 the dry cart electric drive motor did not have an end cover. The uncovered end of the electric motor was exposed to the outside environment.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 B02 I
- Issued
- Aug 7, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: (a) Bay 10 - On or about April 7, 2015 the junction box for bay 10 trip alarms did not have a cover. The plastic conduit at the bottom of the junction box was broken and had pulled loose from the box.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at JOE N. Miles & Sons, INC.
View JOE N. Miles & Sons, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340522176.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.