OAK BROOK, IL ·
OSHA Inspection: SLABY CONSTRUCTION CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SLABY CONSTRUCTION CO. in 3512 YORK RD., OAK BROOK, IL 60521 (NAICS 238140). OSHA activity number 340522762.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SLABY CONSTRUCTION CO.
- Site address
- 3512 YORK RD.
- City
- OAK BROOK
- State
- IL
- ZIP
- 60521
- Mailing
- 901 W. 89TH, HICKORY HILLS, IL 60457
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- Sep 17, 2015
- Abate by
- Nov 4, 2015
- Penalty
- Initial $400 · Current $400
General-duty citation text
29 CFR 1903.19(c)(1): The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Slaby Construction Co., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 02 05/18/2015 01 03 06/02/2015 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- · Z (O) $400
1910.178 L01 I
- Issued
- May 6, 2015
- Abate by
- Jun 2, 2015
- Penalty
- Initial $1,600 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l) On or about April 7, 2015 the employer did not ensure that each powered industrial truck operator was trained and certified to operate a powered industrial truck, exposing employees to the hazards associated with operating a forklift. Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
- · I (S) $1000
- · Z (S) $1600
1926.451 G01
- Issued
- May 6, 2015
- Abate by
- May 18, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): 29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1m) above a lower level was not protected from falling to that lower level by fall protection established in accordance with paragraphs (g)(1)(i) through (vii) of this section: On April 7, 2015 employees installing decorative stone were not protected from a 21 foot fall while working from a metal frame scaffold and the employer did not ensure that employees were protected from falling to a lower level. Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
- · I (S) $1000
- · Z (S) $2000
1910.1200 E01
- Issued
- May 6, 2015
- Abate by
- Jun 30, 2015
- Penalty
- Initial $1,200 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about April 7, 2015, employees using Type N mortar mix while laying chimney brick were exposed to the hazards associated with silica and hexavalent chromium and the employer did not provide hazardous chemical training, labeling, and safety data sheets to employees working with these contaminants. Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
- · I (S) $1000
- · Z (S) $1200
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340522762.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.