BUFFALO, NY —
OSHA Inspection: THE CROSBY COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THE CROSBY COMPANY in 183 PRATT STREET, BUFFALO, NY 14240 (NAICS 332116). OSHA activity number 340524818.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE CROSBY COMPANY
- Site address
- 183 PRATT STREET
- City
- BUFFALO
- State
- NY
- ZIP
- 14240
- Mailing
- 183 PRATT STREET, BUFFALO, NY 14240
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 35
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.36 D01
- Issued
- May 29, 2015
- Abate by
- Jul 14, 2015
- Penalty
- Initial $2,800 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) On or about 04/15/15, in the tool room, employer failed to make sure that all exit doors where unlocked from the inside without any keys, tools or special knowledge. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2100
- — Z (S) $2800
1910.147 C06 I
- Issued
- May 29, 2015
- Abate by
- Jul 14, 2015
- Penalty
- Initial $3,500 · Current $2,625 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 04/15/15, in the shop area, employer failed to conduct periodic inspections of the Lockout/Tagout procedures for machines such as but not limited to metal stamping presses. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2625
- — Z (S) $3500
1910.147 C06 II
- Issued
- May 29, 2015
- Abate by
- Jul 14, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The periodic inspection certification of energy control procedures did not contain the required documentation on identification of the machine or equipment, inspection date, employees included, and the person performing the inspection. a) On or about 04/15/15, in the shop area, employer failed to provide documentation for periodic inspection certification of the Lockout/Tagout procedures for machines such as but not limited to metal stamping presses. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.151 C
- Issued
- May 29, 2015
- Abate by
- Jul 14, 2015
- Penalty
- Initial $2,800 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about, 04/15/15, in the Assembly area, employer failed to provide an eye wash station in close proximity where Alkaline Paint Stripper (Sodium Hydroxide) was being dispensed. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2100
- — Z (S) $2800
1910.37 B04
- Issued
- May 29, 2015
- Abate by
- Jul 14, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent: a) On or about 4/15/15, in the Tool Room, employer fail to provide additional exit signs indicating the direction of travel to the nearest emergency exit. b) On or about, 4/15/15, in Building #15, employer failed to provide additional exit signs indicating the direction of travel to the nearest emergency exit. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E02
- Issued
- May 29, 2015
- Abate by
- Jul 14, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly. a) On or about, 04/15/15, in the shop area, employer failed to visually inspect, at least monthly, the fire extinguishers. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at The Crosby Company
View The Crosby Company's full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340524818.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.