OSHA Inspection: ENTEGRIS, INC.

Issued

Jun 22, 2015

Abate by

Aug 7, 2015

Penalty

Initial $4,590 · Current $3,000 Reduced

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:    a)  Production injection molds: On or about April 7, 2015, and at times prior, workers changing injection dies were exposed to falling more than 7 feet from unguarded platforms.    Note 1:  Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard.    Note 2: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).

Issued

Jun 22, 2015

Abate by

Aug 7, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.27(d)(3): The side rails of through or side-step ladder extensions did not extend 3 1/2 feet above parapets and landings:   a)  Production injection molds: On or about April 7, 2015, and at times prior, injection mold maintenance workers were exposed to falling more than 7 feet while using a ladder without a hand hold above the access level.    Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).

Issued

Jun 22, 2015

Abate by

Jul 10, 2015

Penalty

Initial $3,825 · Current $1,800 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): The  point of operation of machines whose operation exposed an employee to injury, was not guarded:    a) Maintenance Shop: on or about 04/7/2015 and at times prior, a chuck guard was not installed on a Bridgeport TORMAX 16-8 horizontal metal lathe.    Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).