LUBBOCK, TX —
OSHA Inspection: MAURICIO CABRERA JIMENEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MAURICIO CABRERA JIMENEZ in 9608 IOLA AVE., CORNER OF 98TH AND IOLA, LUBBOCK, TX 79424 (NAICS 238130). OSHA activity number 340531201.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAURICIO CABRERA JIMENEZ
- Site address
- 9608 IOLA AVE., CORNER OF 98TH AND IOLA
- City
- LUBBOCK
- State
- TX
- ZIP
- 79424
- Mailing
- 9018 CR 6520, LUBBOCK, TX 79416
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 8
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.100 A
- Issued
- Jul 30, 2015
- Penalty
- Initial $1,020 · Current $510 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about April 10, 2014 employees were exposed to struck by hazards when entering underneath an area where work was occurring without wearing protective helmets.
Recent events (2)
- — I (S) $510
- — Z (S) $1020
1926.102 A01
- Issued
- Jul 30, 2015
- Abate by
- Aug 11, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. On or about April 10, 2015 employees were exposed to struck-by hazards when not provided eye protection while working with a nail gun.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.304 D
- Issued
- Jul 30, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: On or about April 10, 2015 employees were exposed to amputation hazards while working with the Makita hand saw due to the guard being jammed so that it would not instantly return to covering position when tool is withdrawn from work.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.404 B01 III C
- Issued
- Jul 30, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(iii)(C): Where an assured equipment grounding conductor program was being utilized, the employer did not ensure that each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, were not visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage. On or about April 10, 2015 employees were exposed to electrical hazards while working with a hand saw where the temporary wiring being used for power was not fully insulated.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.405 G02 IV
- Issued
- Jul 30, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: On or About April 10, 2015 employees were exposed to electrical hazards while operating a hand saw due to a lack of strain relief at the base of the saw.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.501 B13
- Issued
- Jul 30, 2015
- Abate by
- Aug 11, 2015
- Penalty
- Initial $2,400 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about April 4, 2015 employees were exposed to fall hazards while doing framing work at a height greater than 6 feet without any fall protection.
Recent events (2)
- — I (S) $1200
- — Z (S) $2400
More inspections at Mauricio Cabrera Jimenez
View Mauricio Cabrera Jimenez's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340531201.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.