TOMAHAWK, WI —
OSHA Inspection: DAIGLE BROTHERS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DAIGLE BROTHERS, INC. in 727 SOUTHGATE DR., TOMAHAWK, WI 54487 (NAICS 332312). OSHA activity number 340531409.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAIGLE BROTHERS, INC.
- Site address
- 727 SOUTHGATE DR.
- City
- TOMAHAWK
- State
- WI
- ZIP
- 54487
- Mailing
- 727 SOUTHGATE DR., TOMAHAWK, WI 54487
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 30
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.252 B02 I A
- Issued
- Jun 23, 2015
- Abate by
- Aug 12, 2015
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(i)(A): Helmets or hand shields were not used during all arc welding or arc cutting operations: a) On or about 04-09-15, an employee was using a MIG Welder to tack weld clips onto a steel I-Beam without utilizing any eye protection.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.303 F02
- Issued
- Jun 23, 2015
- Abate by
- Aug 12, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) On or about 04-09-15, the legend posted inside an electrical panel box located in the band saw area did not correctly identify the circuit breaker switches.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.305 B01 II
- Issued
- Jun 23, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) On or about 04-09-15, the employer had an unused opening in a 220V AC panel box which is located in the band saw area that was not covered. b) On or about 04-09-15, the employer had an unused opening in a 220V AC panel box which is located in the band saw area that was covered with duct tape and not an approved circuit breaker cover.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.334 A02 I
- Issued
- Jun 23, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): a) On or about 04-09-15, the employer did not require the employees to inspect a damaged angle grinder tool prior to use.
Recent events (2)
- — I (S) $0
- — Z (S) $2100
1910.334 A02 II
- Issued
- Jun 23, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $0 · Current $1,260
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the equipment safe were made: a) On or about 04-09-15, employer had available for use a hand held angle grinder which had a damaged cord.
Recent events (2)
- — I (S) $1260
- — Z (S) $0
1910.1200 E01
- Issued
- Jun 23, 2015
- Abate by
- Aug 12, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) On or about 04-09-15, the employer did not develop a written hazard communication program including a list of chemicals for the employees who are exposed to chemicals such as but not limited to Pyroil Non-Chlorinated Brake Parts Cleaner and Synlube General Machining Semi-Synthetic Metalworking Fluid when operating the drill and/or band saw.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Jun 23, 2015
- Abate by
- Aug 12, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about 04-09-15, the employer had failed to provide employees with Hazard Communication safety training on chemicals in their work area such as but not limited to Pyroil Non-Chlorinated Brake Parts Cleaner and Synlube General Machining Semi-Synthetic Metalworking Fluid.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Daigle Brothers, INC.
View Daigle Brothers, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340531409.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.