SAN ANTONIO, TX —
OSHA Inspection: AMSCO STEEL, SAN ANTONIO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AMSCO STEEL, SAN ANTONIO in 2707 CASTROVILLE RD., SAN ANTONIO, TX 78237 (NAICS 423510). OSHA activity number 340535350.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMSCO STEEL, SAN ANTONIO
- Site address
- 2707 CASTROVILLE RD.
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78237
- Mailing
- 2707 CASTROVILLE RD., SAN ANTONIO, TX 78237
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423510
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.184 D
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.184(d): Sling(s) and fastenings were not inspected by a competent person each day, before being used, for damage or defects: a) Main production floor, Bridge crane, Letellier 20,000 pound: On or about April 09, 2015, employees were exposed to a struck-by hazard, while using the crane to lift material, which was rigged via a synthetic web sling that had a snag and was not inspected prior to use. b) Main production floor, Bridge crane "A": On or about April 09, 2015, employees were exposed to a struck-by hazard, while using the crane to lift material, which was being rigged via an alloy steel sling/chain that did not have a tag indicating the sling's lifting capacity. The slings were not inspected, prior to use to ensure the sling's identification tags were affixed.
Recent events (3)
- — W (S) $1600
- — C (S) $1600
- — Z (S) $1600
1910.184 I09 III
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(i)(9)(iii): Synthetic web sling(s) with snags, punctures, tears, or cuts were not immediately removed from service: Main production floor, Bridge crane, Letellier 20,000 pound: On or about April 09, 2015, employees were exposed to a struck-by hazard while using the crane to lift material, which was being rigged via a synthetic web sling that had a snag and was not removed from service.
Recent events (3)
- — W (S) $0
- — C (S) $0
- — Z (S) $0
1910.184 E01
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: Main production floor, Bridge crane "A": On or about April 09, 2015, employees were exposed to a struck-by hazard while using the crane to lift material, which was rigged via an alloy steel sling that did not have a I.D. tag indicating the sling's lifting capacity.
Recent events (3)
- — W (S) $1600
- — C (S) $1600
- — Z (S) $1600
1910.219 F01
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: North end of production floor: On or about April 09, 2015, employees were exposed to a caught-in hazard, while working near a Rowe Straightener (Model: V6-60) that did not have the chain and sprocket power transmission system guarded.
Recent events (3)
- — W (S) $1600
- — C (S) $1600
- — Z (S) $1600
1910.253 B02 II
- Issued
- Aug 18, 2015
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: Stairway landing: On or about April 09, 2015, employees were exposed to a struck-by hazard while working near an unsecured compressed oxygen gas cylinder located next to storage shelves.
Recent events (3)
- — W (S) $1200
- — C (S) $1200
- — Z (S) $1200
More inspections in this industry (NAICS 423510)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340535350.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.