COLUMBUS, GA —
OSHA Inspection: COLUMBUS CABINET COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COLUMBUS CABINET COMPANY, INC. in 6047 COCA COLA BOULEVARD, COLUMBUS, GA 31908 (NAICS 321918). OSHA activity number 340552207.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COLUMBUS CABINET COMPANY, INC.
- Site address
- 6047 COCA COLA BOULEVARD
- City
- COLUMBUS
- State
- GA
- ZIP
- 31908
- Mailing
- P.O. BOX 7696, COLUMBUS, GA 31908
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 26
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C01
- Issued
- Aug 27, 2015
- Abate by
- Nov 1, 2015
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) Facility: The employer did not implement a lockout/tagout program including annual inspections and training for the employees required to perform maintenance and services on equipment in the plant areas. Employees were or could have been exposed to caught in or struck by hazards. Employees maintain machines such as, but limited to shapers, moulders, bandsaws, planners, sanders, borers and compressors. Columbus Cabinet Company, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(1), which was contained in OSHA inspection number 478540, citation number 1, item number 3 and was affirmed as a final order on 10/09/2012, with respect to a workplace located at 6047 Coca Cola Blvd., Columbus, Georgia.
Recent events (3)
- — A (R) $7000
- — I (R) $5600
- — Z (R) $7000
1910.178 L01 I
- Issued
- Aug 27, 2015
- Abate by
- Nov 1, 2015
- Penalty
- Initial $4,200 · Current $4,200
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Production Area - The employer did not train or evaluate all employees operating the Daewoo and Clark forklift trucks before allowing them to operate the equipment. Employees were exposed to a struck-by hazard. Columbus Cabinet Company, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(1), which was contained in OSHA inspection number 478540, citation number 1, item number 4 and was affirmed as a final order on 10/09/2012, with respect to a workplace located at 6047 Coca Cola Blvd., Columbus, Georgia.
Recent events (3)
- — A (R) $4200
- — I (R) $3360
- — Z (R) $4200
1910.1200 H03 IV
- Issued
- Aug 27, 2015
- Abate by
- Nov 1, 2015
- Penalty
- Initial $0 · Current $0
01302150
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information: a) Paint Booth and Production Floor; Employees were required to work with chemicals such as, but not limited to, paint, lacquerer thinner, alcohol, and propane while manufacturing cabinets. The employer did not provide training on the new label elements and safety data sheet format.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Columbus Cabinet Company, INC.
View Columbus Cabinet Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340552207.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.