STURGEON BAY, WI —
OSHA Inspection: HATCO CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HATCO CORPORATION in 208 E. DECK STREET, STURGEON BAY, WI 54235 (NAICS 333241). OSHA activity number 340552983.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HATCO CORPORATION
- Site address
- 208 E. DECK STREET
- City
- STURGEON BAY
- State
- WI
- ZIP
- 54235
- Mailing
- 208 E. DECK STREET, STURGEON BAY, WI 54235
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333241
- Employees
- 360
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.219 D01
- Issued
- May 12, 2015
- Abate by
- Jun 17, 2015
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) On or about 4/14/2015, The belt and pulley inside the base for the band saw were not guarded by a cover panel or other suitable guard at the time of the inspection in the area where wooden crates were made.
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
1910.219 E03
- Issued
- May 12, 2015
- Abate by
- Jun 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3): 29 CFR 1910.219(e)(3): Vertical and inclined belts were not enclosed by a guard conforming to the standards in paragraphs specified in 29 CFR 1910.219(m) and (o): a) On or about 4/14/2015, The belt and pulley inside the base for the band saw were not guarded by a cover panel or other suitable guard at the time of the inspection in the area where wooden crates were made.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 B
- Issued
- May 12, 2015
- Abate by
- May 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(b): Where employees provided their own protective equipment, the employer did not ensure its adequacy, including proper maintenance, and sanitation of the equipment. a) On or about 4/14/2015, The employee that was testing the water tanks was wearing his own regular prescription glasses with damaged or missing nose pads. They were not ANSI Z87.1 approved safety glasses.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B02
- Issued
- May 12, 2015
- Abate by
- Jun 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) On or about 4/14/2015 the employer was using a four plex wall mount electrical box on a pendant at the AMADA HD 1003 NT machine with the box laying on the cement floor.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Hatco Corporation
View Hatco Corporation's full OSHA safety record →
More inspections in this industry (NAICS 333241)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340552983.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.