PARK RIDGE, IL —
OSHA Inspection: RED OAK - TREE EXPERT, CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RED OAK - TREE EXPERT, CORP. in 1108 POTTER RD., PARK RIDGE, IL 60068 (NAICS 561730). OSHA activity number 340555366.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RED OAK - TREE EXPERT, CORP.
- Site address
- 1108 POTTER RD.
- City
- PARK RIDGE
- State
- IL
- ZIP
- 60068
- Mailing
- 3220 N SALK RD, ARLINGTON HEIGHTS, IL 60004
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561730
- Employees
- 5
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.132 F01
- Issued
- May 13, 2015
- Abate by
- Jun 16, 2015
- Penalty
- Initial $1,600 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment: a) The employer failed to provide employees performing tree trimming and chipping operations training on the use of, inspection of and care of personal protective equipment, such as hard hats. b) The employer failed to provide employees performing tree trimming and chipping operations training on the use of, inspection of and care of personal protective equipment, such as eye protection. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1000
- — Z (S) $1600
1910.133 A01
- Issued
- May 13, 2015
- Abate by
- Jun 9, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: a) The employer failed to require the use of proper eye protection, such as safety glasses, for employees that were exposed to flying debris during the use of the Vermeer SC252 stump grinder and the Mobark Twister 12 Brush wood chipper. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.135 A01
- Issued
- May 13, 2015
- Abate by
- Jun 9, 2015
- Penalty
- Initial $2,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects: a) The employer failed to require the use of head protection, such as hard hats, for employees that were exposed to falling objects and debris during tree trimming operations and from being struck by branches that were being chipped when operating the Mobark Twister 12 Brush wood chipper. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $2400
More inspections in this industry (NAICS 561730)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340555366.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.