LITTLE ROCK, AR —
OSHA Inspection: SUPERIOR CUSTOM FRAMING L.L.C.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of SUPERIOR CUSTOM FRAMING L.L.C. in 2216 PERRY ST., LITTLE ROCK, AR 72205 (NAICS 238130). OSHA activity number 340559715.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERIOR CUSTOM FRAMING L.L.C.
- Site address
- 2216 PERRY ST.
- City
- LITTLE ROCK
- State
- AR
- ZIP
- 72205
- Mailing
- 2825 GLOHAVEN DRIVE, CONWAY, AR 72034
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.102 A01
- Issued
- Jun 3, 2015
- Abate by
- Jun 17, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. An employee of Superior Custom Framing L.L.C. was observed working on the roof using pneumatic nail gun less than 2 feet away from his face without using eye or face protection exposing employee to struck by hazards from flying debris or nail.
Recent events (1)
- — Z (S) $2800
1926.501 B10
- Issued
- Jun 3, 2015
- Abate by
- Jun 17, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(10): 1926.501(b)(10): At this job site, employees engaged in roofing activities on a low-sloped roof (slope less than or equal to 4 in 12), with unprotected sides and edges, approximately 11-ft. above the ground, without being protected by a guardrail system, safety net system, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system . An employee was observed performing roofing construction without adequate fall protection. This condition exposed employee to the hazard of falls from an elevation greater than 10 feet.
Recent events (1)
- — Z (S) $2800
1926.1051 A
- Issued
- Jun 3, 2015
- Abate by
- Jun 17, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.1051(a): 29 CFR 1926.1051(a): Stairways or ladders were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist was provided: The employer did not provide a ladder or other safe means of access for an employee working on top of the roof; height measuring 11 feet to ground below.
Recent events (1)
- — Z (S) $2800
More inspections at Superior Custom Framing L.L.C.
View Superior Custom Framing L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340559715.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.