ELK GROVE VILLAGE, IL —
OSHA Inspection: MOTIF EVENTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MOTIF EVENTS, INC. in 860 BONNIE LN, ELK GROVE VILLAGE, IL 60007 (NAICS 541613). OSHA activity number 340561257.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOTIF EVENTS, INC.
- Site address
- 860 BONNIE LN
- City
- ELK GROVE VILLAGE
- State
- IL
- ZIP
- 60007
- Mailing
- 860 BONNIE LN, ELK GROVE VILLAGE, IL 60007
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541613
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 A04
- Issued
- Jul 31, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of the powered industrial truck were performed by the employer without the manufacturer's prior written approval: a) On April 16, 2015, Motif Events, Inc. did not obtain the manufacturer's prior written approval for the 6 foot fork extension additions used in the facility. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.178 A05
- Issued
- Jul 31, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) On April 16, 2015, Motif Events, Inc. did not ensure the Toyota electric forklift truck (s/n - 14665) was marked to identify the fork extension attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.213 C01
- Issued
- Jul 31, 2015
- Penalty
- Initial $1,700 · Current $850 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Shop Area - On April 16, 2015, Motif Events, Inc. did not ensure that the Delta Unisaw was guarded by an automatically adjusting hood which completely enclosed the portion of the saw above the table and above the material being cut. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $850
- — Z (S) $1700
1910.213 C02
- Issued
- Jul 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Shop Area - On April 16, 2015, Motif Events, Inc. did not ensure that the Delta Unisaw was furnished with a spreader. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jul 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed circular ripsaw(s) did not have nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) Shop Area - On April 16, 2015, Motif Events, Inc. did not ensure that the Delta Unisaw had nonkickback fingers or dogs. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 541613)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340561257.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.