Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GEORGIA WINDOW COMPANY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GEORGIA WINDOW COMPANY in 4025 FAMBROUGH DRIVE, POWDER SPRINGS, GA 30127 (NAICS 321918). OSHA activity number 340565712.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Georgia Window Company — free Get an email when a new federal OSHA severe-injury report for Georgia Window Company is published. One employer, no account, unsubscribe in one click.
Site address
4025 FAMBROUGH DRIVE
City
POWDER SPRINGS
State
GA
ZIP
30127
Mailing
4025 FAMBROUGH DRIVE, POWDER SPRINGS, GA 30127
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321918
Employees
32
Ownership type
A

6 citations on file for this inspection.

1910.23 D01 I

Serious Gravity 1 1 instance 4 exposed
Issued
Jul 20, 2015
Penalty
Initial $2,100 · Current $1,260 Reduced
29 CFR 1910.23(d)(1)(i): The employer did not provide a standard handrail on stairs with four or more risers.   1) Loading Dock - Employees were using a stairway to enter and exit that were not equipped with a handrail.  Employees were exposed to a fall hazard.
Recent events (2)
  • — I (S) $1260
  • — Z (S) $2100

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 20, 2015
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazards created by in-going nip points, rotating parts, and/or flying chips and sparks:  1) Wood Exterior Door Area - An employee was using a Ryobi drill press (model number DP121L and serial AZ073624009) that was not equipped with a guard, exposing employees to a serious laceration hazard from rotating bit and chuck.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.1200 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Jul 20, 2015
Abate by
Aug 13, 2015
Penalty
Initial $2,100 · Current $1,260 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement and maintain at the workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g) and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met:  1) Window Shop and Wood Exterior Door Areas - Employer did not develop a written hazard communication program including listing and documenting all the chemicals employees are required to use on a daily basis such as but not limited to Hydrocarbon, Methyl Ethyl Keytone, Butane, Acetone, Mineral Spirit, Acetone and Propane.
Recent events (2)
  • — I (S) $1260
  • — Z (S) $2100

1910.1200 G08

Serious Gravity 1 1 instance 3 exposed
Issued
Jul 20, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s)  1) Shop Area - The employer did not provide or make available safety data sheets (SDS) for hazardous chemicals employees were using at the site such as, but not limited to Hydrocarbon, Methyl Ethyl Keytone, Butane, Acetone, Mineral Spirit, Acetone and Propane.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 3 exposed
Issued
Jul 20, 2015
Abate by
Aug 13, 2015
Penalty
Initial $0 · Current $0
29 CFR 1919.1200(h)(1):  Employees were not provided information and training as specified in 29 CFR 1910.1200(h)(2) and (3) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area:  1) Production Area - The employer did not provide training to the employees using hazardous chemicals including but not limited to Hydrocarbon, Methyl Ethyl Keytone, Butane, Acetone, Mineral Spirit, Acetone and Propane.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03 IV

Serious Gravity 1 1 instance 3 exposed
Issued
Jul 20, 2015
Abate by
Aug 13, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:  1) Shop Area - The employer did not provide training to employees on the hazard communication standard relating to the new Global Harmonized System (GHS) that took effective December 1, 2013. Employees were using hazardous chemicals such as but limited to Hydrocarbon, Methyl Ethyl Keytone, Butane, Acetone, Mineral Spirit, Acetone and Propane.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Georgia Window Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340565712.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.