SHIPPENSBURG, PA —
OSHA Inspection: ALEXANDER FRAMING LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ALEXANDER FRAMING LLC in 122 WALNUT BOTTOM ROAD, SHIPPENSBURG, PA 17257 (NAICS 238130). OSHA activity number 340575455.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALEXANDER FRAMING LLC
- Site address
- 122 WALNUT BOTTOM ROAD
- City
- SHIPPENSBURG
- State
- PA
- ZIP
- 17257
- Mailing
- 11238 EVANS TRAIL, SUITE 203, BELTSVILLE, MD 20705
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.501 B01
- Issued
- Oct 14, 2015
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: (a) 122 Walnut Bottom Road - The employer did not ensure that employees working on third story with an open side were protected from falls with guard rails, safety nets or personal fall protection, thereby exposing employees to a approximately 20 foot fall hazard on or about April 16th, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $3500
1926.501 B04 I
- Issued
- Oct 14, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes. a) 122 Walnut Bottom Road, Shippensburg, Pa - Employees on the 3rd floor were exposed to a 28 x 16 unprotected hole located on the third floor, on or about April 16th, 2015. No abatement certification or documentation required.
Recent events (1)
- — Z (S) $2800
1926.502 D15
- Issued
- Oct 14, 2015
- Abate by
- Nov 9, 2015
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1926.502(d)(15)(ii): Anchorages used for attachment of personal fall arrest equipment shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kN) per employee attached, or shall be designed, installed under the supervision of a qualified person: (a) 122 Walnut Bottom Road - The employer did not ensure that the anchor point located on the 3rd story floor was installed under the supervision of a qualified person, thereby exposing employees to an approximately 20 foot fall hazard on or about April 16th, 2015. (b) 122 Walnut Bottom Road The life line was secured to the D ring of the anchor point with a knot. The employer did not ensure that the life line was properly connected to the anchor point on the 3rd story floor with manufacturers provided clip on or about April 16th, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $3500
1926.503 A01
- Issued
- Oct 14, 2015
- Abate by
- Nov 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: (a) 122 Walnut Bottom Road - The employer did not provide training to the employees which would have allowed them to recognize the hazards of falling and the procedures and equipment to minimize those hazards, thereby exposing employees to possible injuries, on or about April 16, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1926.503 B01
- Issued
- Oct 14, 2015
- Abate by
- Nov 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training: (a) 122 Walnut Bottom Road - The employer did not provide a written certification record of the training classes attended by the employees which would have allowed employee(s) to recognize the hazards of falling and the procedures to minimize those hazards, thereby exposing employees to possible injuries, on or about April 16, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
More inspections at Alexander Framing LLC
View Alexander Framing LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340575455.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.