Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROJAS CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROJAS CONSTRUCTION in 1521 S. CAGE BLVD., PHARR, TX 78577 (NAICS 238140). OSHA activity number 340575497.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rojas Construction — free Get an email when a new federal OSHA severe-injury report for Rojas Construction is published. One employer, no account, unsubscribe in one click.
Establishment
ROJAS CONSTRUCTION
Site address
1521 S. CAGE BLVD.
City
PHARR
State
TX
ZIP
78577
Mailing
4205 CENIZO STREET, MISSION, TX 78574
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.451 C02

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 23, 2015
Penalty
Initial $1,020 · Current $1,020
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, and uprights did not bear on base plates and mud sills or other adequate firm foundation:  At the south wall of a commercial building job site, the scaffold legs of a fabricated frame scaffold were placed on strips of scrap lumber not adequate to support a scaffold three tiers high. Employees were exposed to scaffold tip overs while applying stucco to the wall.
Recent events (1)
  • — Z (S) $1020

1926.451 E09 IV

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 23, 2015
Penalty
Initial $1,020 · Current $1,020
29 CFR 1926.451(e)(9)(iv): Cross braces on tubular welded frame scaffolds were used as a means of access or egress.  At the south wall of a commercial building jobsite, employees climbed scaffold braces up and down to gain access to the work platform and to climb down from the scaffold. Employees were exposed to falls greater than 10 feet.
Recent events (1)
  • — Z (S) $1020

1926.451 G04 XV

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 23, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.451(g)(4)(xv): Crossbracing used in place of a midrail was unacceptable because the crossing point of two braces is between 20 inches (0.5 m) and 30 inches ((0.8 M) above the work platform or as a toprail when the crossing point of two braces is not between 20 inches (0.5 m) and 30 inches (0.8 m) above the work platform or as a toprail when the crossing point of two braces is between 38 inches (0.97 m) and 48 inches (1.3 m) above the work platform.  The endpoints at each upright were more than 48 inches (1.3 m) apart.   At the south wall of a commercial building jobsite, employees worked from a scaffold platform two and three tiers high without midrails.
Recent events (1)
  • — Z (S) $2000

View Rojas Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340575497.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.