CORDELE, GA —
OSHA Inspection: CLASSIC SURROUNDS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CLASSIC SURROUNDS LLC in 501 HARRIS ST, CORDELE, GA 31010 (NAICS 327390). OSHA activity number 340580570.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLASSIC SURROUNDS LLC
- Site address
- 501 HARRIS ST
- City
- CORDELE
- State
- GA
- ZIP
- 31010
- Mailing
- P.O.BOX 99, CORDELE, GA 31010
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 35
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.22 A01
- Issued
- Oct 20, 2015
- Abate by
- Dec 8, 2015
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. A) Plant #2, on or about April 22, 2015, the employer did not ensure that all elevated surfaces were kept free of hazardous accumulations of combustible dust, exposing employees to fire, deflagration, and dust explosion.
Recent events (2)
- — I (O) $0
- — Z (S) $2975
1910.107 B05 I
- Issued
- Oct 20, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $4,900 · Current $3,686 Reduced
General-duty citation text
29 CFR 1910.107(b)(5)(i): Visible gauges or audible alarm or pressure activated devices were not installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media. A) Plant #2 spray paint area, on or about April 22, 2015, the spray booths used to spray stain and the top coat did not have visible gauge or other means to indicted that the air velocity is maintained in the booths, exposing employees to fire and explosion hazard.
Recent events (2)
- — I (S) $3686
- — Z (S) $4900
1910.107 B05 IV
- Issued
- Oct 20, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers: A) Plant #2 spray paint booths, on or about April 22, 2015, the employer operated three spray booths used to spray flammable material that did not have a sprinkler behind the filtering media, exposing employees to a fire hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 G02
- Issued
- Oct 20, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary: a) Plant #2 spray paint booths, on or about April 22, 2015, the employer did not ensure that all surfaces in the three spray booths used to apply flammable material were kept clean, exposing employees to fire and explosion hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 H01
- Issued
- Oct 20, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material. A) Plant #2 production area, on or about April 22, 2015, the lower portion of a saw blade on a Delta radial arm saw was not adequately guarded, exposing employees to the hazard of a rotating saw blade.
Recent events (2)
- — I (S) $0
- — Z (S) $2975
1910.213 H03
- Issued
- Oct 20, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $0 · Current $1,762
General-duty citation text
29 CFR 1910.213(h)(3): Radial saw(s) were not provided with an adjustable stop to prevent the forward travel of the blade beyond the position necessary to complete the cut in repetitive operations: A) Plant #2 production area, on or about April 22, 2015, a Delta radial arm saw did not have an adjustable stop to prevent the forward travel of the blade beyond the position necessary to complete the cut, exposing employees to the hazard of a rotating saw blade.
Recent events (2)
- — I (S) $1762
- — Z (S) $0
1910.213 R04
- Issued
- Oct 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of a pop-up cut off saw: A) Plant #2 production area, on or about April 22, 2015, the hood guard on a pop-up cut off saw was not properly adjusted to the size of the boards being cut, exposing employees to the hazard of a rotating saw blade.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 A
- Issued
- Oct 20, 2015
- Penalty
- Initial $2,380 · Current $1,167 Reduced
General-duty citation text
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition: A) Plant #2 production area, on or about April 22, 2015, an employee was using a pneumatic nail gun that did not have a safety tip (safety catch device), exposing the employee to a hazard of puncture wounds.
Recent events (2)
- — I (S) $1167
- — Z (S) $2380
1910.147 C06 I
- Issued
- Oct 20, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: A) Plant #2 production area, on or about April 22, 2015, the employer did not perform a periodic review of the lockout/tag out program.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 L01
- Issued
- Oct 20, 2015
- Abate by
- Dec 8, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(l)(1): Evaluations of the workplace were not conducted to ensure the written respiratory protection program was being effectively implemented: A) Plant #2 sanding area, on or about April 22, 2015, the employer did not conduct an evaluation of the respirator program to see if the proper respirators were being used and those employees required to wear respirators were medically qualified.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Classic Surrounds LLC
View Classic Surrounds LLC's full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340580570.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.