PITTSTON, PA —
OSHA Inspection: NATURE'S WAY PUREWATER SYSTEMS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of NATURE'S WAY PUREWATER SYSTEMS INC. in 164 COMMERCE RD., PITTSTON, PA 18640 (NAICS 312112). OSHA activity number 340589407.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NATURE'S WAY PUREWATER SYSTEMS INC.
- Site address
- 164 COMMERCE RD.
- City
- PITTSTON
- State
- PA
- ZIP
- 18640
- Mailing
- 164 COMMERCE RD., PITTSTON, PA 18640
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 312112
- Employees
- 140
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Jun 17, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $2,295 · Current $2,295
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a) Line 4 Depal: The emergency exit route from the Line 4 Depal catwalk was partially obstructed by a conveyor system that created a trip hazard, as observed on or about April 28, 2015. Abatement Certification Required.
Recent events (1)
- — Z (S) $2295
1910.212 A01
- Issued
- Jun 17, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $2,295 · Current $2,295
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Line 4 palletizer: A section of guarding was missing along the left side of the interlocked gate permitting access to the moving palletizing equipment, as observed on or about April 28, 2015. b) Line 4 labeler: There were exposed rotating parts on the Trine labelers creating nip point hazards, as observed on or about April 28, 2015. Abatement Certification Required.
Recent events (1)
- — Z (S) $2295
1910.219 F03
- Issued
- Jun 17, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $7,200 · Current $7,200
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) Line 4 labeler: Sprockets and chains (2) beneath the Line 4 Trine labeler were exposed to contact, as observed on or about April 28, 2015. Nature's Way Purewater Systems Inc. was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard which was contained in OSHA inspection number 727201, citation number 1, item number 1 and was affirmed as a final order on February 8, 2013 with respect to a work place located at 164 Commerce Rd., Pittston, PA. Abatement Certification and Documentation Required.
Recent events (1)
- — Z (R) $7200
1910.147 C06 II
- Issued
- Jun 17, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Maintenance: The employer did not certify that periodic inspections of the energy control procedures had been performed, on or about April 28, 2015. Abatement Certification Required.
Recent events (1)
- — Z (O) $0
1910.147 C07 I B
- Issued
- Jun 17, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employee(s) was not instructed in the purpose and use of the energy control procedure: a) Production area: Affected employees (machine operators) were not instructed in the purpose and use of the energy control procedures, on or about April 28, 2015. Abatement Certification Required.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 312112)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340589407.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.