Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CARDINAL CG

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CARDINAL CG in 420 WICK DRIVE, MAZOMANIE, WI 53560 (NAICS 327211). OSHA activity number 340607548.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cardinal CG — free Get an email when a new federal OSHA severe-injury report for Cardinal CG is published. One employer, no account, unsubscribe in one click.
Establishment
CARDINAL CG
Site address
420 WICK DRIVE
City
MAZOMANIE
State
WI
ZIP
53560
Mailing
420 WICK DRIVE, MAZOMANIE, WI 53560
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327211
Employees
48
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 4 exposed
Issued
Jul 6, 2015
Abate by
Jul 27, 2015
Penalty
Initial $7,000 · Current $4,200 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    On or about May 1, 2015, procedures were not utilized for the control of potentially hazardous energy when a maintenance employee was repairing Accumulator #2.
Recent events (2)
  • — I (S) $4200
  • — Z (S) $7000

1910.147 D02

Serious Gravity 10 1 instance 4 exposed
Issued
Jul 6, 2015
Abate by
Jul 27, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:  On or about May 1, 2015, the Accumulator 2 was not turned off or shut down using the procedures established.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 D03

Serious Gravity 10 1 instance 4 exposed
Issued
Jul 6, 2015
Abate by
Jul 27, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):  On or about May 1, 2015, all energy isolating devices that were needed to control the energy to the Accumulator 2 were not operated in such a manner as to isolate the Accumulator 2 from the energy sources, such as, but not limited to, pressing the E-Stop on the HMI console and turning off knife switch at the main electrical cabinet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C04 II B

Other-than-serious 1 instance 4 exposed
Issued
Jul 6, 2015
Abate by
Jul 27, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.  The energy control procedure for Line 2 Accumulator did not clearly and specifically outline the steps for isolating equipment to control hazardous energy.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.147 C04 II C

Other-than-serious 1 instance 4 exposed
Issued
Jul 6, 2015
Abate by
Jul 27, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them:   The energy control procedure for Line 2 Accumulator did not clearly and specifically outline the steps for placement of lockout devices.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Cardinal CG's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340607548.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.