CORFU, NY —
OSHA Inspection: EDWARD ARNOLD SCRAP PROCESSORS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of EDWARD ARNOLD SCRAP PROCESSORS, INC. in 2216 ANGLING ROAD, CORFU, NY 14036 (NAICS 423930). OSHA activity number 340611771.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EDWARD ARNOLD SCRAP PROCESSORS, INC.
- Site address
- 2216 ANGLING ROAD
- City
- CORFU
- State
- NY
- ZIP
- 14036
- Mailing
- 2216 ANGLING ROAD, CORFU, NY 14036
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 68
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.132 A
- Issued
- Jun 12, 2015
- Abate by
- Jul 7, 2015
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment including personal protective clothing, was not was not provided and used when necessary whenever hazards capable of causing injury and impairment were encountered: a) On or about 05/04/2015 in the torching area; where employees were exposed to fire hazards while cutting scrap materials which may have contained combustible/flammable materials, fire rated protective clothing was not provided. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $4900
1910.252 A03 I
- Issued
- Jun 12, 2015
- Abate by
- Jul 7, 2015
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present or any substances such as greases, tars, acids, or other materials which where subjected to heat, might produce flammable or toxic vapors: a) On or about 05/04/2015 in the torching area; where a vessel containing a combustible/flammable material was exposed to torch cutting without having been cleaned out prior to the torch cutting, causing a flash fire which burned an employee. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $4900
- — Z (S) $4900
1910.252 A03 II
- Issued
- Jun 12, 2015
- Abate by
- Jul 7, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(3)(ii): All hollow spaces, cavities, or containers were not vented to permit the escape of air or gases before preheating, cutting, or welding was performed: a) On or about 05/04/2015 in the torching area; where torch cutting of wire cable on top of a closed vessel, that contained combustible/flammable residue, resulted in a flash fire which burned the employee performing the torch cutting. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Edward Arnold Scrap Processors, INC.
View Edward Arnold Scrap Processors, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340611771.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.