DALTON, GA —
OSHA Inspection: PRECISION PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PRECISION PRODUCTS, INC. in 2908 N. DUG GAP ROAD, DALTON, GA 30720 (NAICS 332116). OSHA activity number 340615517.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRECISION PRODUCTS, INC.
- Site address
- 2908 N. DUG GAP ROAD
- City
- DALTON
- State
- GA
- ZIP
- 30720
- Mailing
- 2908 N. DUG GAP ROAD, DALTON, GA 30720
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 44
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.23 C01
- Issued
- Aug 21, 2015
- Penalty
- Initial $4,900 · Current $2,695 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: a) 2908 N Dug Gap Road Dalton Ga 30720: Storage area: Employees are exposed to fall hazards of up to 10 feet to the concrete floor below when working from an open sided floor that has no railing.
Recent events (2)
- — I (S) $2695
- — Z (S) $4900
1910.24 H
- Issued
- Aug 21, 2015
- Penalty
- Initial $4,900 · Current $2,695 Reduced
General-duty citation text
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms: a) 2908 N Dug Gap Road Dalton Ga 30720: Storage area: Employees were exposed to fall hazards of up to 10 feet when using a stairway without a railing installed to access an upper floor.
Recent events (2)
- — I (S) $2695
- — Z (S) $4900
1910.36 D01
- Issued
- Aug 21, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) 2908 N Dug Gap Road Dalton Ga. 30720, Machine Shop: Employees were exposed to smoke inhalation and burn hazards caused by two fire exit doors being bolt locked.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
1910.212 A01
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $2,800 · Current $1,540 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) 2908 N Dug Gap Road Dalton Ga. 30720 - Machine Shop; Employees were exposed to cuts while operating four Clausing drill presses. b) 2908 N Dug Gap Road Dalton Ga. 30720 - Machine Shop; Employees were exposed to cuts while operating two Jet drill presses. c) 2908 N Dug Gap Road Dalton Ga. 30720 - Machine Shop; Employees were exposed to cuts while operating one Kingston HJ 1700 lathe. d) 2908 N Dug Gap Road Dalton Ga. 30720 - Machine Shop; Employees were exposed to cuts while operating one Sharp 20120 lathe without guards.
Recent events (2)
- — I (S) $1540
- — Z (S) $2800
1910.212 B
- Issued
- Aug 21, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $2,100 · Current $1,155 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) 2908 N Dug Gap Road Dalton Ga 30720 - Machine Shop/Welding Shop: Employees are exposed to struck-by hazards from two Wilton Jet drill presses that were not securely anchored to prevent walking or moving.
Recent events (2)
- — I (S) $1155
- — Z (S) $2100
1910.303 G02 I
- Issued
- Aug 21, 2015
- Penalty
- Initial $2,100 · Current $1,155 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: a) 2908 N Dug Gap Road Dalton Ga 30720, Abrasive Blasting Area: Employees were exposed to shock hazards of 120 volts ac from the on/off switch that was missing its cover.
Recent events (2)
- — I (S) $1155
- — Z (S) $2100
1910.22 D01
- Issued
- Aug 21, 2015
- Abate by
- Sep 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate. a) 2908 N Dug Gap Road Dalton Ga. 30720, Storage area/Break Area: Loads were being placed on roofs of offices that were not marked to show how much weight the roofs could safely hold.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.253 B05 III F
- Issued
- Aug 21, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(5)(iii)(F): Cylinders found to have leaky valves or fittings which could not be stopped by closing of the valve were not taken outdoors away from sources of ignition and slowly emptied: a) 2908 N Dug Gap Road Dalton Ga 30720 - Welding Shop: Employees were exposed to a leaking unsecured Argon bottle without a valve protection cap that was placed to the side of the shop for three days.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Precision Products, INC.
View Precision Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340615517.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.