DEL VALLE, TX —
OSHA Inspection: GIROIR ENTERPRISES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GIROIR ENTERPRISES, INC. in 7600 ELROY RD., DEL VALLE, TX 78617 (NAICS 327991). OSHA activity number 340616978.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GIROIR ENTERPRISES, INC.
- Site address
- 7600 ELROY RD.
- City
- DEL VALLE
- State
- TX
- ZIP
- 78617
- Mailing
- 455 COMMERCIAL DR., BUDA, TX 78610
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 9
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.135 A01
- Issued
- Aug 10, 2015
- Abate by
- Aug 14, 2015
- Penalty
- Initial $1,200 · Current $900 Reduced
General-duty citation text
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects: On or about May 7, 2015, and at times prior thereto, employees were moving a granite slab without the "ground man" wearing head protection, exposing the employee to the hazard of being struck by the load.
Recent events (2)
- — I (O) $900
- — Z (S) $1200
1910.178 A04
- Issued
- Aug 10, 2015
- Abate by
- Oct 20, 2015
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: On or about May 7, 2015, and at times prior thereto, the employer modified the Toyota fork lift model number 7FGU25 for purposes of hoisting and moving granite slabs which affects the capacity and safe operation of the fork lift, exposing employees to the hazards of being struck by the load and/or forklift.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.178 M02
- Issued
- Aug 10, 2015
- Abate by
- Oct 20, 2015
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.178(m)(2): Employee(s) stood under or passed under the elevated portion of a powered industrial truck(s): On or about May 7, 2015, while moving a granite slab to the storage area, an employee stood directly under the elevated portion of the fork lift, exposing the employee to the hazard of being struck by the load and/or forklift.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.178 O01
- Issued
- Aug 10, 2015
- Abate by
- Aug 14, 2015
- Penalty
- Initial $2,800 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.178(o)(1): The employer did not ensure that only stable or safely arranged loads were handled: On or about February 18, 2015, and at times prior thereto, the employer did not ensure that before movement of the load was initiated by the fork lift operator, all loads were safely arranged and stable within the lifting device(s), exposing employees to the hazard of being struck by, or caught between granite slabs.
Recent events (2)
- — I (S) $2000
- — Z (S) $2800
1910.178 L06
- Issued
- Aug 10, 2015
- Abate by
- Aug 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): On or about February 18, 2015, and at times prior thereto, the employer did not ensure that each forklift operator was certified to operate the forklift safely, exposing employees to the hazard of being struck by, caught in, or caught between objects. Note: The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.303 B07 IV
- Issued
- Aug 10, 2015
- Abate by
- Aug 14, 2015
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There were damaged parts that may adversely affect safe operation or mechanical strength of electric equipment, such as parts that were broken, bent, cut or deteriorated by corrosion, chemical action, or overheating: On or about May 7, 2015, the employer was allowing the use of a broken electrical cord to provide power to the portable grinder, exposing employees to an electrical shock hazard.
Recent events (2)
- — I (O) $0
- — Z (S) $1200
More inspections in this industry (NAICS 327991)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340616978.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.