Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: C.A.T. JR. CONSTRUCTION, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of C.A.T. JR. CONSTRUCTION, INC. in 929 MOUNT ZION ROAD, LEBANON, PA 17046 (NAICS 238160). OSHA activity number 340619006.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch C.A.T. JR. Construction, INC. — free Get an email when a new federal OSHA severe-injury report for C.A.T. JR. Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
929 MOUNT ZION ROAD
City
LEBANON
State
PA
ZIP
17046
Mailing
15 SOUTH LINCOLN STREET, CLEONA, PA 17042
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
1
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 3 instances 1 exposed
Issued
Sep 23, 2015
Abate by
Oct 20, 2015
Penalty
Initial $400 · Current $400
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.  a)  Mount Zion Road, Lebanon, PA:  The employer did not certify that Citation 1, Items 1, 2, and 3 were abated, on or about August 11, 2015.  ABATEMENT CERTIFICATION REQUIRED.
Recent events (1)
  • — Z (O) $400

1926.100 A

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 8, 2015
Abate by
Jul 27, 2015
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:   a) 929 Mount Zion Road, Lebanon, PA; An employee was setting trusses craned from overhead without the use of a hard hat, on or about 05/08/2015.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $1200

1926.501 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 8, 2015
Abate by
Jul 27, 2015
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:   a) 929 Mount Zion Road, Lebanon, PA; An employee was setting trusses 9 feet 6 inches above the ground without the use of fall protection, on or about 05/08/2015.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $1600

1926.1051 A

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 8, 2015
Abate by
Jul 27, 2015
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.1051(a): Stairways or ladders were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist was provided:   a) 929 Mount Zion Road, Lebanon, PA; An employee used a Werner 6 foot step ladder to access a 9 foot 6 inch work area with a 3 foot 6 inch break in elevation, on or about 05/08/2015.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $1200

View C.A.T. JR. Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340619006.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.