WHEELING, IL ·
OSHA Inspection: CAMOSY INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CAMOSY INCORPORATED in 1000 N. MILWAUKEE AVE., WHEELING, IL 60090 (NAICS 236220). OSHA activity number 340620012.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAMOSY INCORPORATED
- Site address
- 1000 N. MILWAUKEE AVE.
- City
- WHEELING
- State
- IL
- ZIP
- 60090
- Mailing
- 12795 120TH AVE., KENOSHA, WI 53142
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 7
- Ownership type
- Private (A)
Citations
8 citations on file for this inspection.
1926.304 F
- Issued
- Jun 30, 2015
- Abate by
- Jul 7, 2015
- Penalty
- Initial $4,200 · Current $3,000 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(a) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not guarded by an automatically adjusting hood which completely encloses that portion of the saw above the table and above the material being cut: a) On or about May 7, 2015, a Bosch table saw was not equipped with a blade guard when used to rip lumber. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $3000
- · Z (S) $4200
1926.304 F
- Issued
- Jun 30, 2015
- Abate by
- Jul 7, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about May 7, 2015, a Bosch table saw was not equipped with a spreader when used to rip lumber. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.304 F
- Issued
- Jun 30, 2015
- Abate by
- Jul 7, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers on dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about May 7, 2015, a Bosch table saw was not equipped with non-kickback fingers or dogs when used to rip lumber. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.405 B01
- Issued
- Jun 30, 2015
- Penalty
- Initial $4,200 · Current $3,000 Reduced
General-duty citation text
29 CFR 1926.405(b)(1): Unused openings in cabinets, boxes, and fittings were not effectively closed: a) On or about May 7, 2015, employees were exposed to electrical shock from a live circuit breaker panel that did not have a cover installed.
Recent events (2)
- · I (O) $3000
- · Z (S) $4200
1926.405 D
- Issued
- Jun 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(d): Panelboards mounted in cabinets, cutout boxes or enclosures designed for the purpose were not dead front: a) On or about May 7, 2015, employees were exposed to electrical shock while in close proximity to a circuit breaker panel that had its cover removed.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.405 G01 II
- Issued
- Jun 30, 2015
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.405(g)(1)(ii): Flexible cord was not equipped with an attachment plug and energized from a receptacle outlet when used as permitted in 29 CFR 1926.405(g)(1)(i) [C], [F], or [H]: a) On or about May 7, 2015, employees were exposed to electrical hazards while using an extension cord to supply power to a miter saw and vacuum cleaner when the cord was hardwired into a breaker panel. No abatement certification or documentation required for this violation.
Recent events (2)
- · I (S) $0
- · Z (S) $2800
1926.405 G02 IV
- Issued
- Jun 30, 2015
- Penalty
- Initial $0 · Current $2,000
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: On or about May 7, 2015, an extension cord supplying power to a miter saw and a vacuum cleaner was hardwired directly into a circuit breaker panel when no strain relief was provided to prevent strain on the terminal screws. No abatement certification or documentation required for this violation.
Recent events (2)
- · I (O) $2000
- · Z (S) $0
1926.416 E01
- Issued
- Jun 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) On and about May 7, 2015, an extension cord that was hardwired into a circuit breaker panel had damage along its length to include cuts and melted areas on the cord jacket. No abatement certification or documentation required for this violation.
Recent events (2)
- · I (O) $0
- · Z (S) $0
More inspections at Camosy Incorporated
View Camosy Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340620012.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.