Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: MARCUS DAVIS LAWNCARE LLC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of MARCUS DAVIS LAWNCARE LLC in N 8554 W IL 108, CARLINVILLE, IL 62626 (NAICS 561730). OSHA activity number 340636141.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Marcus Davis Lawncare LLC for free Get an email when a new federal OSHA severe-injury report for Marcus Davis Lawncare LLC is published. One employer, no account, unsubscribe in one click.
Site address
N 8554 W IL 108
City
CARLINVILLE
State
IL
ZIP
62626
Mailing
262 WOODLAWN DRIVE, CARLINVILLE, IL 62626
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
561730
Employees
8
Ownership type
Private (A)

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 5 instances 6 exposed
Issued
Nov 17, 2015
Abate by
Dec 18, 2015
Penalty
Initial $2,800 · Current $1,820 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to equipment roll over.       On June 24, 2015, at 17820 Ridge Drive in Carlinville, Illinois, an employee was exposed to equipment roll over hazards when operating a John Deere Z930M zero turn commercial mower on an approximately 14 degree slope terrain. The employee was not using a seat belt while the roll over protection structure (ROPS) was in use.       Among other methods, one feasible and acceptable abatement method to correct this hazardous condition is to follow the manufactures operations manual and require and ensure the use of seat belts when using roll over protection structure (ROPS) in an upright position.
Recent events (2)
  • · I (S) $1820
  • · Z (S) $2800

1910.1200 E01

Serious Gravity 1 1 instance 8 exposed
Issued
Nov 17, 2015
Abate by
Dec 14, 2015
Penalty
Initial $1,200 · Current $780 Reduced
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):               a)    A written Hazard Communications program had not been developed to inform and train employees to protect them from chemical hazards while working with but not limited to pesticides such as Roundup and Triplett, and various chemicals associated with lawn mower maintenance and operations such as gasoline, grease and oil.
Recent events (2)
  • · I (S) $780
  • · Z (S) $1200

1910.1200 G01

Serious Gravity 1 1 instance 8 exposed
Issued
Nov 17, 2015
Abate by
Dec 14, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:      a)         The Employer had not obtained the Safety Data Sheets for the hazardous chemicals  associated with lawn mower maintenance and operations such as but not limited to gasoline, grease and oil.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 H02 I

Serious Gravity 1 1 instance 8 exposed
Issued
Nov 17, 2015
Abate by
Dec 14, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(2)(i): The employer did not provide information to the employees on the requirements of the Hazard Communication Standard 29 CFR 1910.1200:     a)         Employees had not been trained regarding the hazardous chemicals  associated with lawn mower maintenance and operations such as but not limited to gasoline, grease and oil.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340636141.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.