FREDERICKTOWN, PA —
OSHA Inspection: FREDERICKTOWN BUTCHER SHOP
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FREDERICKTOWN BUTCHER SHOP in 334 FRONT STREET, FREDERICKTOWN, PA 15333 (NAICS 445210). OSHA activity number 340639855.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FREDERICKTOWN BUTCHER SHOP
- Site address
- 334 FRONT STREET
- City
- FREDERICKTOWN
- State
- PA
- ZIP
- 15333
- Mailing
- P. O. BOX 387, FREDERICKTOWN, PA 15333
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445210
- Employees
- 32
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Jun 8, 2015
- Abate by
- Jul 22, 2015
- Penalty
- Initial $2,380 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Facility: On or about May 18, 2015, the employer did not have a written lockout/tagout program.
Recent events (2)
- — I (S) $1900
- — Z (S) $2380
1910.147 C04 I
- Issued
- Jun 8, 2015
- Abate by
- Jul 22, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Facility: On or about May 18, 2015, the company did not develop, document and utilize lockout/tagout procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Jun 8, 2015
- Abate by
- Jul 22, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: (a) Facility: On or about May 18, 2015, the employer did not train its employees in lockout/tagout procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jun 8, 2015
- Penalty
- Initial $4,900 · Current $3,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Facility: On or about May 2, 2015, the two electrical interlocks to the guard on the Daniels Food Equipment meat mixer were not working. This allowed the blades of the meat mixer to continue to operate when the plexi-glass guard was opened. This condition created a pinch/amputation hazard to the operator of this machine.
Recent events (2)
- — I (S) $3800
- — Z (S) $4900
1910.212 A01
- Issued
- Jun 8, 2015
- Abate by
- Jun 18, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Facility: On or about May 18, 2015, there was no electrical interlock on the meat chopper when the machine was opened. This condition allowed employees to be exposed to rotating cutting blades.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.39 A02
- Issued
- Jun 8, 2015
- Penalty
- Initial $2,975 · Current $500 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours: (a) Facility: On or about May 2, 2015 the employer did not report an in-patient hospitalization of an employee as a result of being injured at the place of employment.
Recent events (2)
- — I (O) $500
- — Z (O) $2975
More inspections at Fredericktown Butcher Shop
View Fredericktown Butcher Shop's full OSHA safety record →
More inspections in this industry (NAICS 445210)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340639855.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.