COLEMAN, TX —
OSHA Inspection: GENERAL LEATHERCRAFT, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GENERAL LEATHERCRAFT, INC. in 900 AIRPORT ROAD, COLEMAN, TX 76834 (NAICS 335921). OSHA activity number 340641521.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GENERAL LEATHERCRAFT, INC.
- Site address
- 900 AIRPORT ROAD
- City
- COLEMAN
- State
- TX
- ZIP
- 76834
- Mailing
- 900 AIRPORT ROAD, COLEMAN, TX 76834
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335921
- Employees
- 13
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.37 B02
- Issued
- Jul 2, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": In the storage area south side of the building, the employer did not ensure the exit door was equipped or identified with an "EXIT" sign exposing employees to entrapment hazards.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.178 L01 I
- Issued
- Jul 2, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): In the warehouse area, the employer did not ensure the employees required to operate the forklift were trained in the safe use and operation of the Toyota forklift exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.219 D01
- Issued
- Jul 2, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): In the production area, the employer did not guard the stand-up riveter machine vertical rotating pulley exposing employees to caught-by hazards.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.219 E03 I
- Issued
- Jul 2, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): In the production area, the employer did not guard the stand-up riveter machine vertical rotating belt exposing employees to caught-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV A
- Issued
- Jul 2, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: In the storage area, an extension cord, wrapped around the storage rack, was used as permanent wiring to energize a floor fan exposing employees to electrical shock and fire hazards.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.305 G02 III
- Issued
- Jul 2, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: In the production area, the employer did not ensure strain relief was provided to prevent tension to the power cord to the stand-up riveter machine on/off switch exposing employees to electrical shock hazards.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
More inspections at General Leathercraft, INC.
View General Leathercraft, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 335921)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340641521.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.