Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CATALINA DESIGN INC.

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of CATALINA DESIGN INC. in 300 W CAMPBELL RD, RICHARDSON, TX 75080 (NAICS 238140). OSHA activity number 340661214.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Catalina Design INC. — free Get an email when a new federal OSHA severe-injury report for Catalina Design INC. is published. One employer, no account, unsubscribe in one click.
Site address
300 W CAMPBELL RD
City
RICHARDSON
State
TX
ZIP
75080
Mailing
9336 CRESTEDGE DR, DALLAS, TX 75238
Inspection type
Programmed Related (J)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
6
Ownership type
A

7 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 24, 2015
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.  (a) The employer did not ensure that each employee working under scaffolding and a wall being bricked that were exposed to struck by hazards were protected by protective helmets.
Recent events (1)
  • — Z (S) $2400

1926.451 H02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 24, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.451(h)(2)(ii): A toeboard shall be erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below, except on float (ship) scaffolds where an edging of 3/4 x 1 1/2 inch (2 x 4 cm) wood or equivalent may be used in lieu of toeboards;  (a) The employer did not ensure that each employee working under scaffolding was protected from struck by hazards created by falling objects by installing toe boards on platforms more than 10 feet above the ground below.
Recent events (1)
  • — Z (S) $0

1926.451 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 24, 2015
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds shall be fully planked or decked between the front uprights and the guardrail supports as follows:  (a) The employer did not ensure that employees were protected from fall hazards by ensuring that all working levels of scaffolds were fully planked.
Recent events (1)
  • — Z (S) $2400

1926.451 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 24, 2015
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface shall be used.  Crossbraces shall not be used as a means of access.  (a) The employer did not ensure proper access to the scaffolding platform that was more than (2) two feet above or below a point of access for employees thereby exposing them to fall hazards.
Recent events (1)
  • — Z (S) $2400

1926.451 F07

Serious Gravity 10 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 31, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(f)(7): Scaffolds shall be erected, moved, dismantled, or altered only under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration. Such activities shall be performed only by experienced and trained employees selected for such work by the competent person.  (a) The employer did not ensure that scaffolds were erected, moved, or dismantled only under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling this exposed employees to a possible scaffold collapse or other hazards due to scaffolding erection, moving, or dismantling not being done correctly.
Recent events (1)
  • — Z (S) $2800

1926.451 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 24, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1)(i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers. (vi) Each employee performing overhand bricklaying operations from a supported scaffold shall be protected from falling from all open sides and ends of the scaffold (except at the side next to the wall being laid) by the use of a personal fall arrest system or guardrail system (with minimum 200 pound toprail capacity).  (a) The employer did not ensure that each employee had been protected from fall hazards from falling to a lower level while working on scaffolding that was greater than 10 feet high by the use of a personal fall arrest system or guardrail system.
Recent events (1)
  • — Z (S) $2800

1926.454 A

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 14, 2015
Abate by
Jul 31, 2015
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable:  (a) The employer did not ensure each employee who performs work while on a scaffold was trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards thereby exposing those employees to fall and struck by hazards.
Recent events (1)
  • — Z (S) $1600

View Catalina Design INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340661214.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.