BAYPORT, NY —
OSHA Inspection: COSTANZA SIDING INC
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of COSTANZA SIDING INC in CHURCH ST., BAYPORT, NY 11705 (NAICS 238170). OSHA activity number 340663343.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COSTANZA SIDING INC
- Site address
- CHURCH ST.
- City
- BAYPORT
- State
- NY
- ZIP
- 11705
- Mailing
- 2716 KANE AVENUE, MEDFORD, NY 11763
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.100 A
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $1,320 · Current $1,320
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) Worksite: Employees working directly under ongoing overhead siding work were not using head protection; on or about 5/22/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $1320
1926.503 A01
- Issued
- Jun 19, 2015
- Abate by
- Jul 1, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) Worksite: Employees were doing siding work on a residential building from the roof of the first story approximately 10 ft. above the ground and had not been trained in recognizing and minimizing fall hazards; on or about 5/22/15. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.501 B13
- Issued
- Jun 19, 2015
- Abate by
- Jun 25, 2015
- Penalty
- Initial $4,000 · Current $4,000
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Worksite: Employees were doing siding work from the roof of a residential building approximately 10 ft. above the ground and did not have fall protection; on or about 5/22/15. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (R) $4000
More inspections in this industry (NAICS 238170)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340663343.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.