FANWOOD, NJ —
OSHA Inspection: AGAT & SON FRAMING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AGAT & SON FRAMING, INC. in 233 LA GRANDE AVE, FANWOOD, NJ 07023 (NAICS 238130). OSHA activity number 340676519.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGAT & SON FRAMING, INC.
- Site address
- 233 LA GRANDE AVE
- City
- FANWOOD
- State
- NJ
- ZIP
- 07023
- Mailing
- 92 GLENSIDE AVE, SUMMIT, NJ 07901
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 10
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 18, 2015
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. a. 233 La Grande Ave, Fanwood, NJ - (Elite Properties Site) Employees engaged in commercial framing activities operating a pneumatic nail gun were not wearing protective eye equipment. Violation observed on or about June 3, 2015
Recent events (3)
- — A (S) $2400
- — I (S) $1440
- — Z (S) $2400
1926.451 B01
- Issued
- Aug 18, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights: a. 233 La Grande Ave, Fanwood, NJ - (Elite Properties Site) Employees engaged in commercial framing activities were observed working from a Horse Scaffold that was not fully planked. Employees were observed working from single width 2X8 planks to install joist bracing. Violation observed on or a about June 3, 2015
Recent events (3)
- — A (S) $2000
- — I (S) $1200
- — Z (S) $2000
1926.501 B01
- Issued
- Aug 18, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. a. 233 La Grande Ave, Fanwood, NJ - (Elite Properties Site) Employees performing commercial framing activities from the second level were not protected from falls by use of a guardrail system, safety net system, or personal fall arrest system. Employees were observed walking the joists being installed for the next level without fall protection. Violation observed on or about June 3, 2015 b. 233 La Grande Ave, Fanwood, NJ - (Elite Properties Site) Employees engaged in commercial framing activities were observed installing floor joists from the top plate of the wall without the uses of fall protection. Violation observed on or about June 3, 2015
Recent events (3)
- — A (S) $2800
- — I (S) $1680
- — Z (S) $2800
1926.1053 B13
- Issued
- Aug 18, 2015
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: a. 233 La Grande Ave, Fanwood, NJ - (Elite Properties Site) Near Elevator Employees engaged in commercial framing activities used the top step of an A-frame stepladder to perform their work. Employees used a 6 foot A-frame ladder to install the joists bracing. Violation observed on or about June 3, 2015 b. 233 La Grande Ave, Fanwood, NJ - (Elite Properties Site) Employees engaged in commercial framing activities used the top step of an A-frame stepladder to perform their work. Employees used a 4 foot A-frame ladder to install the joists. Violation observed on or about June 3, 2015
Recent events (3)
- — A (S) $2400
- — I (S) $1440
- — Z (S) $2400
More inspections at Agat & SON Framing, INC.
View Agat & SON Framing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340676519.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.