Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MBA BUILDING SUPPLIES, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MBA BUILDING SUPPLIES, INC. in 2200 TEMPEL DR., LIBERTYVILLE, IL 60048 (NAICS 332114). OSHA activity number 340677137.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MBA Building Supplies, INC. — free Get an email when a new federal OSHA severe-injury report for MBA Building Supplies, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2200 TEMPEL DR.
City
LIBERTYVILLE
State
IL
ZIP
60048
Mailing
2200 TEMPEL DR., LIBERTYVILLE, IL 60048
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332114
Employees
238
Ownership type
A

12 citations on file for this inspection.

1910.22 A01

Other-than-serious 2 instances 50 exposed
Issued
Nov 27, 2015
Penalty
Initial $2,700 · Current $1,000 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:    a) Production Area - The floor in the DeWALT compound miter saw (north) work area contained an accumulation of saw dust exposing employees to slip and fall hazards.     b) Production Area - The floor in the DeWALT compound miter saw (south) work area contained an accumulation of saw dust exposing employees to slip and fall hazards.
Recent events (2)
  • — I (O) $1000
  • — Z (S) $2700

1910.37 A03

Other-than-serious 1 instance 100 exposed
Issued
Nov 27, 2015
Penalty
Initial $2,700 · Current $1,000 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:    a) Production Area - The west exit door did not open freely due to rust damage.
Recent events (2)
  • — I (O) $1000
  • — Z (S) $2700

1910.147 C04 I

Deleted Serious Gravity 10 2 instances 20 exposed
Issued
Nov 27, 2015
Abate by
Dec 16, 2015
Penalty
Initial $6,300 · Current $0 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section.  a) On or about May 27, 2015, the employer did not develop, document and utilize procedures for the control of potentially hazardous energy for employees engaging in servicing activities on the Bradbury Double Ended Stockreel on Structural Line #9.  Employees were exposed to caught-by hazards associated with pneumatic and electrical energy through inadvertent contact with the steel coil when making adjustments, which resulted in an amputation of an employee's four fingers.        b) On or about June 3, 2015, the employer did not develop, document and utilize procedures for the control of potentially hazardous energy for employees engaging in servicing activities on the Bradbury Double Ended Stockreel on Structural Line #9.  Employees were exposed to caught-by hazards associated with pneumatic and electrical energy through inadvertent contact with the steel coil when making adjustments, which may lead to amputations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6300

1910.147 C04 II

Deleted Serious Gravity 10 2 instances 20 exposed
Issued
Nov 27, 2015
Abate by
Dec 16, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items (a) through (d) of this section:  a) The employer did not ensure that the energy control procedures clearly and specifically outlined the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy during servicing of the Bradbury Double Ended Stockreel on Structural Line #9, which included adjusting, banding and removing steel coils produced on this equipment.  The Bradbury Double Ended Stockreel exposed affected employees to caught-by hazards associated with pneumatic and electrical energy.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C07 I A

Deleted Serious Gravity 10 1 instance 20 exposed
Issued
Nov 27, 2015
Abate by
Dec 16, 2015
Penalty
Initial $6,300 · Current $0 Reduced
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:  a) On or about May 27, 2015, the employer did not ensure employees engaging in servicing activities on the Bradbury Double Ended Stockreel on Structural Line #9, such as adjusting the outer lap of a steel coil, received training at the authorized level that included the types and magnitude of energy sources in the workplace, the methods and means necessary for energy isolation and control.  Employees were exposed to caught-by hazards associated with pneumatic and electrical energy through inadvertent contact with the steel coil when making adjustments, which resulted in an amputation of an employee's four fingers.        b) On or about June 3, 2015, the employer did not ensure employees engaging in servicing activities on the Bradbury Double Ended Stockreel on Structural Line #9, such as adjusting the outer lap of a steel coil, received training at the authorized level that included the types and magnitude of energy sources in the workplace, the methods and means necessary for energy isolation and control.  Employees were exposed to caught-by hazards associated with pneumatic and electrical energy through inadvertent contact with the steel coil when making adjustments, which may lead to amputations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6300

1910.212 A01

Serious Gravity 10 1 instance 50 exposed
Issued
Nov 27, 2015
Abate by
Feb 26, 2016
Penalty
Initial $6,300 · Current $6,300
29 CFR 1910.212(a)(1): One or more methods f guarding were not provided to protect the operator and other employees in the machine area from hazards created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.    a) On or about May 27, 2015, the employer did not provide guarding to protect the employees from contact with moving/rotating parts during the banding of metal coils on the Bradbury Double Ended Stockreel on Structural Line #9.  Employees were exposed to caught-by hazards associated with the banding operations.  Guarding methods such as barrier guards, two-hand tripping devices, tools to keep workers out of the danger areas or electronic safety devices (including keyed switches) or other effective means were not used.
Recent events (2)
  • — I (S) $6300
  • — Z (S) $6300

1910.212 B

Other-than-serious 2 instances 20 exposed
Issued
Nov 27, 2015
Penalty
Initial $2,700 · Current $500 Reduced
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    a) MBA Building Supplies, Inc. -  The table used with the DeWALT compound miter saw (north) was not anchored to the floor to prevent walking or moving.    b) MBA Building Supplies, Inc. -  The table used with the DeWALT compound miter saw (south) was not anchored to the floor to prevent walking or moving.
Recent events (2)
  • — I (O) $500
  • — Z (S) $2700

1910.305 G01 IV A

Other-than-serious 2 instances 20 exposed
Issued
Nov 27, 2015
Penalty
Initial $900 · Current $450 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for the fixed wiring of a structure:    a) Production Area - The DeWALT compound miter saw (north) was used with an extension cord and not plugged directly into and outlet.  The extension cord was suspended from the ceiling and then plugged into an electrical outlet on an adjacent column.    b) Production Area - The DeWALT compound miter saw (south) was used with an extension cord and not plugged directly into and outlet.   The extension cord was laid across the working walking surface and then plugged into an electrical outlet on an adjacent column.
Recent events (2)
  • — I (O) $450
  • — Z (O) $900

1910.334 A02 I

Other-than-serious 2 instances 20 exposed
Issued
Nov 27, 2015
Penalty
Initial $900 · Current $450 Reduced
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):    a) Production Area - The DeWALT compound miter saw (north) was used with damaged flexible cords.  The employer did not ensure that portable cord and plug connected equipment and extension cord were visually inspected before use.    b) Production Area - The DeWALT compound miter saw (south) was used with damaged flexible cords.  The employer did not ensure that portable cord and plug connected equipment and extension cord were visually inspected before use.
Recent events (2)
  • — I (O) $450
  • — Z (O) $900

1910.1200 E01

Other-than-serious 1 instance 50 exposed
Issued
Nov 27, 2015
Abate by
Jan 15, 2016
Penalty
Initial $900 · Current $900

Hazardous substances 00400420153418102150

29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:    a) MBA Building Supplies, Inc. - The employer did not implement at the workplace a written hazard communication program in accordance with 29 CFR 1910.1200 that describes at least the following:    1) Requirement for labeling of containers of hazardous chemicals;  2) Safety data sheet(s) availability;  3) Training of employees;  4) A complete list of hazardous chemicals known to be in the workplace;  5) Methods to inform employees of the hazards of non-routine tasks; and,  6) Methods to inform other employer(s) of safety data sheets availability; the labeling system and any precautionary measures to protect employees.    Employees were exposed to hazardous chemicals including, but not limited to, Winzer Gloss black (8904001) spray paint (contains acetone, propane, n-butane, barium sulphate, glycol ether, methyl isobutyl ketone, methyl propyl ketone, xylene, PM acetate, isobutyl acetate), and Krylon laquer spray paint (contains acetone, toluene, propane, butane, naphthalene).
Recent events (2)
  • — I (O) $900
  • — Z (O) $900

1910.1200 E01 I

Other-than-serious 1 instance 50 exposed
Issued
Nov 27, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 00400420153421502590

29 CFR 1910.1200(e)(1)(i): A list of the hazardous chemicals known to be present using a product identifier that is referenced on the appropriate safety data sheet (the list may be compiled for the workplace as a whole or for individual work areas);   a) MBA Building Supplies, Inc. - The employer did not ensure a list of the hazardous chemicals known to be present at the workplace was prepared, using the identity that is referenced on the appropriate safety data sheet(s).  Employees were exposed to hazardous chemicals including, but not limited to, Winzer Gloss black (8904001) spray paint (contains acetone, propane, n-butane, barium sulphate, glycol ether, methyl isobutyl ketone, methyl propyl ketone, xylene, PM acetate, isobutyl acetate), and Krylon laquer spray paint (contains acetone, toluene, propane, butane, naphthalene).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 50 exposed
Issued
Nov 27, 2015
Abate by
Jan 15, 2016
Penalty
Initial $0 · Current $0

Hazardous substances 00400420153418102460

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) On June 3, 2015, MBA Building Supplies, Inc. did not provide information and training to employees exposed to hazardous chemicals including, but not limited to, Winzer Gloss black (8904001) spray paint (contains acetone, propane, n-butane, barium sulphate, glycol ether, methyl isobutyl ketone, methyl propyl ketone, xylene, PM acetate, isobutyl acetate), and Krylon laquer spray paint (contains acetone, toluene, propane, butane, naphthalene).  b) On June 3, 2015, MBA Building Supplies, Inc. did not provide training to employees by December 1, 2013 that included an explanation of the revised safety data sheet (SDS) format and content, as well as the new labeling system elements, as required by the revised hazard communication standard.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View MBA Building Supplies, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340677137.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.