CHAMBERSBURG, PA —
OSHA Inspection: CUMBERLAND VALLEY SPOUTING LLC
Special Programs inspection · Safety discipline
At a glance
On , OSHA opened a special Programs safety inspection of CUMBERLAND VALLEY SPOUTING LLC in 610 NORTH 5TH AVENUE, CHAMBERSBURG, PA 17201 (NAICS 238170). OSHA activity number 340681964.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUMBERLAND VALLEY SPOUTING LLC
- Site address
- 610 NORTH 5TH AVENUE
- City
- CHAMBERSBURG
- State
- PA
- ZIP
- 17201
- Mailing
- 1651 MOUNTAIN ROAD, NEWBURG, PA 17240
What kind of inspection was it?
- Inspection type
- Special Programs (K)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.300 B03
- Issued
- Jul 23, 2015
- Abate by
- Aug 27, 2015
- Penalty
- Initial $2,000 · Current $1,300 Reduced
General-duty citation text
29 CFR 1926.300(b)(3): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Chambersburg Masonry Supply, Inc., Chambersburg Job Site - An employee standing on a platform mounted on the forks of the Hyster forklift was exposed to pinch points from the moving parts of the mast, on or about June 3, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1300
- — Z (S) $2000
1926.451 B05 I
- Issued
- Jul 23, 2015
- Abate by
- Aug 27, 2015
- Penalty
- Initial $1,600 · Current $1,040 Reduced
General-duty citation text
29 CFR 1926.451(b)(5)(i): The end of a platform 10 feet or less in length, extended over its support more than 12 inches: (a) Chambersburg Masonry Supply, Inc., Chambersburg Job Site - An employee platform mounted on the forks of the Hyster forklift extended more than 12 inches past the support of the forks, on or about June 3, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1040
- — Z (S) $1600
1926.501 B01
- Issued
- Jul 23, 2015
- Abate by
- Aug 27, 2015
- Penalty
- Initial $1,600 · Current $1,040 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: (a) Chambersburg Masonry Supply, Inc., Chambersburg Job Site - An employee working on a roof 10 feet above the ground was not provided with fall protection or a safety monitoring system, on or about June 3, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1040
- — Z (S) $1600
1910.178 L06
- Issued
- Jul 23, 2015
- Abate by
- Aug 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) Cumberland Valley Spouting, LLC - The employer did not certify that each employee who operated a powered industrial truck had been trained and evaluated, on or about June 3, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238170)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340681964.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.