Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UNIVERSAL FABRICATING & CONSTRUCTION SERVICES

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of UNIVERSAL FABRICATING & CONSTRUCTION SERVICES in 1241 MCKINLEY AVENUE, COLUMBUS, OH 43222 (NAICS 332312). OSHA activity number 340692243.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Universal Fabricating & Construction Services — free Get an email when a new federal OSHA severe-injury report for Universal Fabricating & Construction Services is published. One employer, no account, unsubscribe in one click.
Site address
1241 MCKINLEY AVENUE
City
COLUMBUS
State
OH
ZIP
43222
Mailing
1241 MCKINLEY AVENUE, COLUMBUS, OH 43222
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
71
Ownership type
A

4 citations on file for this inspection.

1910.22 A02

Other-than-serious 1 instance 70 exposed
Issued
Oct 9, 2015
Abate by
Oct 25, 2015
Penalty
Initial $3,927 · Current $0 Reduced
29 CFR 1910.22(a)(2): The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition. Where wet processes are used, drainage shall be maintained, and false floors, platforms, mats, or other dry standing places should be provided where practicable.    a.  At the work site at 1240 McKinley Avenue, Columbus, Ohio, fugitive steel shot pellets accumulated on the floor around the Wheel-a-Brator blasting booth operator's control panel and adjacent employee walkways.  The employer did not ensure that the floor around the blasting booth area was kept in a clean condition.
Recent events (2)
  • — I (O) $0
  • — Z (S) $3927

1910.95 L01

Other-than-serious 1 instance 70 exposed
Issued
Oct 9, 2015
Abate by
Nov 14, 2015
Penalty
Initial $1,964 · Current $0 Reduced

Hazardous substances 8111

29 CFR 1910.95(l)(1): The employer shall make available to affected employees or their representatives copies of this standard and shall also post a copy in the workplace.    a.  At the work site located at 1241 McKinley Avenue, employees were exposed to noise in excess of an 8-hour Time Weighted Average (TWA) of 85 decibels while cutting, welding, blasting, machining and fabricating very large custom metal construction structures.  The employer had not posted or provided exposed employees with a copy of the standard.
Recent events (2)
  • — I (O) $0
  • — Z (S) $1964

1910.134 C

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 9, 2015
Abate by
Nov 14, 2015
Penalty
Initial $2,618 · Current $2,618

Hazardous substances 108025909135

29 CFR 1910.134(c): Respiratory protection program. This paragraph requires the employer to develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use. The program must be administered by a suitably trained program administrator. In addition, certain program elements may be required for voluntary use to prevent potential hazards associated with the use of the respirator. The Small Entity Compliance Guide contains criteria for the selection of a program administrator and a sample program that meets the requirements of this paragraph. Copies of the Small Entity Compliance Guide will be available on or about April 8, 1998 from the Occupational Safety and Health Administration's Office of Publications, Room N 3101, 200 Constitution Avenue, NW, Washington, DC, 20210 (202-219-4667).  a.  At the work site located at 1241 McKinley Avenue, Columbus, Ohio, employees who painted and sanded fabricated parts wore tight-fitting half-face respirators required by the employer.  The employer did not have a written respiratory protection program.
Recent events (2)
  • — I (S) $2618
  • — Z (S) $2618

1910.134 C02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 9, 2015
Abate by
Nov 14, 2015
Penalty
Initial $0 · Current $0

Hazardous substances 108025909135

29 CFR 1910.134(c)(2)(i): An employer may provide respirators at the request of employees or permit employees to use their own respirators, if the employer determines that such respirator use will not in itself create a hazard. If the employer determines that any voluntary respirator use is permissible, the employer shall provide the respirator users with the information contained in Appendix D to this section ("Information for Employees Using Respirators When Not Required Under the Standard"); and    a.  At the work site located at 1241 McKinley Avenue, Columbus, Ohio,employees in the steel shot blast booth area and welders voluntarily wore disposable respiratory protection ("dust masks").  The employer had not provided affected employees with Appendix D.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Universal Fabricating & Construction Services's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340692243.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.