TROUT RUN, PA —
OSHA Inspection: JPW DESIGN & MANUFACTURING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JPW DESIGN & MANUFACTURING, INC. in 6080 SR 14, TROUT RUN, PA 17771 (NAICS 333994). OSHA activity number 340700665.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JPW DESIGN & MANUFACTURING, INC.
- Site address
- 6080 SR 14
- City
- TROUT RUN
- State
- PA
- ZIP
- 17771
- Mailing
- 6080 SR 14, TROUT RUN, PA 17771
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333994
- Employees
- 30
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.23 C01
- Issued
- Sep 14, 2015
- Abate by
- Oct 30, 2015
- Penalty
- Initial $4,200 · Current $3,600 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Every open-sided floor or platform 4 feet or more above adjacent floor or ground level was not guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder: a) Production Area: Employees installing electrical wiring on top of an 8 foot tall industrial oven were not protected from falling, on about June 11, 2015. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $3600
- — Z (S) $4200
1910.178 L01 I
- Issued
- Sep 14, 2015
- Abate by
- Nov 30, 2015
- Penalty
- Initial $4,900 · Current $3,600 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Trout Run Facility: Employees who operate forklifts have not received training and evaluation in the safe operation of powered industrial trucks, on or about June 11, 2015. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $3600
- — Z (S) $4900
1910.243 C01
- Issued
- Sep 14, 2015
- Abate by
- Sep 24, 2015
- Penalty
- Initial $2,100 · Current $1,600 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheels were not used only on machine provided with safety guards as defined in paragraph (c) (1) through (4) of this section: a) Paint Prep Area: A Metabo angle grinder used with an abrasive disk was not equipped with a guard exposing operators to a hand injury, on or about June 11, 2015. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1600
- — Z (S) $2100
1910.212 A03 II
- Issued
- Sep 14, 2015
- Abate by
- Oct 30, 2015
- Penalty
- Initial $3,500 · Current $2,600 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Production Area: The opening below the point of operation guard on the Amada shear exposed the operator to an amputation hazard, on or about June 11, 2015. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2600
- — Z (S) $3500
1910.303 B02
- Issued
- Sep 14, 2015
- Abate by
- Sep 24, 2015
- Penalty
- Initial $3,500 · Current $2,600 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling: a) Production Area: A metal double gang box fitted with a 220 volt receptacle and attached to the end of a flexible cord was not installed and used in accordance with its intended purpose exposing workers to an electric shock hazard, on or about June 11, 2015. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2600
- — Z (S) $3500
1904.29 A
- Issued
- Sep 14, 2015
- Abate by
- Oct 30, 2015
- Penalty
- Initial $700 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Form or equivalent to document recordable injuries: a) Trout Run Facility: Recordable injuries that occurred in 2015 were not recorded on the OSHA 300 form, on or about June 11, 2015. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $700
More inspections at JPW Design & Manufacturing, INC.
View JPW Design & Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333994)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340700665.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.