WINDSOR, CT —
OSHA Inspection: INTERNATIONAL TRANSFER SERVICE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of INTERNATIONAL TRANSFER SERVICE, INC. in 530-A HAYDEN STATION ROAD, WINDSOR, CT 06095 (NAICS 493110). OSHA activity number 340703123.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTERNATIONAL TRANSFER SERVICE, INC.
- Site address
- 530-A HAYDEN STATION ROAD
- City
- WINDSOR
- State
- CT
- ZIP
- 06095
- Mailing
- 530-A HAYDEN STATION ROAD, WINDSOR, CT 06095
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493110
- Employees
- 30
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.110 E04 III
- Issued
- Jul 8, 2015
- Abate by
- Aug 24, 2015
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.110(e)(4)(iii): LP gas container(s) installed on internal combustion engine vehicles were not securely mounted to prevent jarring loose, slipping or rotating: A. On or about June 19, 2015, 500 Hayden Station Road Warehouse: The LP gas container on the Clark GCX12E propane powered forklift was not securely mounted. The propane tank was secured to the vehicle with a nylon strap.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.133 A02
- Issued
- Jul 8, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.133(a)(2): The employer did not ensure that each affected employee that uses eye protection that provides side protection when there was a hazard from flying objects: A. On or about June 18, 2015, 500 Hayden Station Road Crating Shop: An employee working at the C.N. Onsrud CNC router was not wearing impact resistant eye protection with side shields, which complied with American National Standards Institute ANSI Z87.1.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.178 L01 I
- Issued
- Jul 8, 2015
- Abate by
- Oct 6, 2015
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): A. On or about June 18, 2015, Facility-Wide: The employer had not ensured that each employee allowed to operate powered industrial vehicles had been trained and evaluated.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.178 Q07
- Issued
- Jul 8, 2015
- Abate by
- Aug 24, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined, at least daily or before each shift if used on a round-the clock basis, before being placed into service: A. On or about June 18, 2015, Facility-Wide: Powered industrial vehicles used in the company's warehouses were not examined daily for defects. Clark GCX12E propane powered forklift was missing a mounting bracket for the LP gas canister.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.242 B
- Issued
- Jul 8, 2015
- Abate by
- Aug 24, 2015
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: A. On or about June 18, 2015, Crating Shop: In the following locations, compressed air used for cleaning was not reduced to below 30 p.s.i. when dead-ended: 1. At the C.N. Onsrud CNC router. 2. At the Dimter Weinig Gruppe Opticut S50 push feed cross-cut saw.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.303 B02
- Issued
- Jul 8, 2015
- Abate by
- Aug 24, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: A. On or about June 18, 2015, 500 Hayden Station Road, Area C/D: A wall mount listed four receptacle electrical box with perforated knockouts was being used to provide pendant power to the area. The box had one of the knockouts pushed in, exposing employees to the exposed inner conductors.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.304 G05
- Issued
- Jul 8, 2015
- Abate by
- Aug 24, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: A. On or about June 18, 2015, 500 Hayden Station Road building, area C/D: In the following instances, electrical current was detected in the metal parts of the following equipment: 1. Maxxair B30DD 32-inch orange metal-encased floor fan, which was missing a grounding pin. 2. TPI Industrial 30-inch metal-encased pedestal fan.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
More inspections in this industry (NAICS 493110)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340703123.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.