CULLODEN, WV —
OSHA Inspection: G & H MASONRY, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of G & H MASONRY, LLC. in CORNERSTONE AT JAMES RIVER JAMES RIVER TURNPIKE, CULLODEN, WV 25510 (NAICS 238140). OSHA activity number 340713296.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G & H MASONRY, LLC.
- Site address
- CORNERSTONE AT JAMES RIVER JAMES RIVER TURNPIKE
- City
- CULLODEN
- State
- WV
- ZIP
- 25510
- Mailing
- 510 DIAMOND DR., HURRICANE, WV 25526
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 8
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 B01
- Issued
- Aug 7, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) a.) G & H Masonry, LLC., Cornerstone at James River: On or about 6/17/15, employees laying brick on a scaffold were working from a platform 21' above the ground that was not fully planked. ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.451 C01 II
- Issued
- Aug 7, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(c)(1)(ii): Supported scaffolds with a height to base width (including outrigger supports, if used) ratio of more than four to one (4:1) were not restrained from tipping by installing guys, ties, and braces according to the manufacturer's recommendations. a.) G & H Masonry, LLC., Cornerstone at James River: On or about 6/17/15, employees laying brick were working from a supported scaffold that was 5 units high and 1 unit wide that was not properly secured to prevent tipping. ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.451 G04 XV
- Issued
- Aug 7, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(g)(4)(xv): Crossbracing used in place of a toprail was unacceptable because the crossing point of two braces was not between 38 inches (0.5 m) and 48 inches ((0.8 M) above the work platform: a.) G & H Masonry, LLC., Cornerstone at James River: On or about 6/17/15, employees working on a scaffold 21' above the ground were using cross-bracing as a guardrail system but had no top rail to prevent employees from falling. ABATEMEN CERTIFICATION IS REQUIRED.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
More inspections in this industry (NAICS 238140)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340713296.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.