MARIETTA, GA —
OSHA Inspection: QUALITY AIRCRAFT TOOLING, INC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of QUALITY AIRCRAFT TOOLING, INC in 1048 KING INDUSTRIAL DRIVE, MARIETTA, GA 30062 (NAICS 332710). OSHA activity number 340719731.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY AIRCRAFT TOOLING, INC
- Site address
- 1048 KING INDUSTRIAL DRIVE
- City
- MARIETTA
- State
- GA
- ZIP
- 30062
- Mailing
- 1048 KING INDUSTRIAL DRIVE, MARIETTA, GA 30062
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 9
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C
- Issued
- Oct 7, 2015
- Abate by
- Nov 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a) The painting area: The employer did not implement a respiratory protection program for an employee using a North 7700 half mask respirator while painting parts in the spray booth.
Recent events (1)
- — Z (O) $0
1910.134 E01
- Issued
- Oct 7, 2015
- Abate by
- Nov 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) The painting area: An employee using a North 7700 half mask respirator was not provided a medical evaluation by the employer.
Recent events (1)
- — Z (O) $0
1910.134 F01
- Issued
- Oct 7, 2015
- Abate by
- Nov 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a) The painting area: An annual fit test was not provided for an employee using a North 7700 half mask respirator.
Recent events (1)
- — Z (O) $0
1910.134 K
- Issued
- Oct 7, 2015
- Abate by
- Nov 25, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary: a) The painting area: An employee using a North 7700 half mask respirator was not provided training on the respirator as required by the standard.
Recent events (1)
- — Z (O) $0
1910.1200 E01
- Issued
- Oct 7, 2015
- Abate by
- Nov 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Throughout the production area: The employer did not implement a written hazard communication program for the employees using chemicals such as but not limited to, PPG Pithane Ultra, Potters Mesh Beads, machine lubricants and oils.
Recent events (1)
- — Z (O) $0
1910.1200 G01
- Issued
- Oct 7, 2015
- Abate by
- Nov 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use: a) Production area: The employer did not provide safety data sheets for employees using chemicals such as but not limited to, PPG Pithane Ultra, Potters Mesh Beads, machine lubricants and oils.
Recent events (1)
- — Z (O) $0
1910.1200 H01
- Issued
- Oct 7, 2015
- Abate by
- Nov 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Production area: The employer did not provide hazard communication training for employees using chemicals such as, but not limited to, PPG Pithane Ultra, Potters Mesh Beads, machine lubricants and oils.
Recent events (1)
- — Z (O) $0
More inspections at Quality Aircraft Tooling, INC
View Quality Aircraft Tooling, INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340719731.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.