NEW HARTFORD, NY —
OSHA Inspection: CRAIG KRATENZBERG
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CRAIG KRATENZBERG in 100 KINGFISHER LANE, NEW HARTFORD, NY 13413 (NAICS 238140). OSHA activity number 340726538.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRAIG KRATENZBERG
- Site address
- 100 KINGFISHER LANE
- City
- NEW HARTFORD
- State
- NY
- ZIP
- 13413
- Mailing
- 10641 WOODGATE ROAD, WOODGATE, NY 13494
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 B01
- Issued
- Jun 26, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights was not planked: a) On or about 6/22/2015, On the Scaffolding: Employees were utilizing tubular welded frame scaffolding that was fully planked between the uprights of the scaffolding. Employees were exposed to falls of up to approximately twenty feet. Abatement certification is required for this item.
Recent events (3)
- — J (S) $0
- — C (S) $2800
- — Z (S) $2800
1926.451 E01
- Issued
- Jun 26, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used: a) On or about 6/22/2015, On the Scaffolding: Employees were climbing the end frames of the tubular welded frame scaffolding to access the scaffolding work levels. Employees were exposed to falls of up to approximately twenty feet. Abatement certification is required for this item.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1926.451 G01
- Issued
- Jun 26, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level: a) On or about 6/22/2015, On the Scaffolding: Employees were utilizing tubular welded frame scaffolding that was not provided with any fall protection. Employees were exposed to falls of up to approximately twenty feet. Abatement certification is required for this item.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1926.451 F03
- Issued
- Jun 26, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity: a) On or about 6/22/2015, On the Scaffolding: Employees were utilizing tubular welded frame scaffolding to apply stucco. The scaffold was not equipped with a safe means of access, a lack of fall protection, and not fully planked. There are no daily inspections being performed prior to use. Abatement certification is required for this item.
Recent events (3)
- — J (S) $0
- — C (S) $2800
- — Z (S) $2800
1926.454 A
- Issued
- Jun 26, 2015
- Abate by
- Jul 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: a) On or about 6/22/2015, On the Scaffolding: Employees were utilizing tubular welded frame scaffolding to apply stucco. The employees were not provided with training in the recognition and avoidance of hazards associated with tubular welded frame scaffolding. Abatement certification is required for this item.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340726538.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.