NEW HYDE PARK, NY —
OSHA Inspection: ADVANCED ARCHITECTURAL GRILLE
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ADVANCED ARCHITECTURAL GRILLE in 149 DENTON AVE., NEW HYDE PARK, NY 11040 (NAICS 332999). OSHA activity number 340746635.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADVANCED ARCHITECTURAL GRILLE
- Site address
- 149 DENTON AVE.
- City
- NEW HYDE PARK
- State
- NY
- ZIP
- 11040
- Mailing
- 149 DENTON AVE., NEW HYDE PARK, NY 11040
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 24
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 28, 2015
- Abate by
- Jan 8, 2016
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Worksite, 149 Denton Ave. New Hyde Park, NY - Employees were using a Grizzly G1023s 10in table saw without a guard installed; on or about 7/1/15. b) Worksite, 149 Denton Ave. New Hyde Park, NY - Employees were using a Shop Fox 073770 12in table saw without a guard installed; on or about 7/1/15.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.134 C
- Issued
- Dec 28, 2015
- Abate by
- Jan 25, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a) Worksite, 149 Denton Ave. New Hyde Park NY - Employees are required to wear Miller LPR 100 half faced respirators, and there was no respiratory program in place; on or about 7/1/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 D01 III
- Issued
- Dec 28, 2015
- Abate by
- Jan 25, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form: a) Worksite, 149 Denton Ave. New Hyde Park NY - Employees are required to wear Miller LPR 100 half faced respirators. The employer did not identify or evaluate the respiratory hazards present while welding different metals; on or about 7/1/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 E01
- Issued
- Dec 28, 2015
- Abate by
- Jan 25, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (Construction Reference 1926.103)(a) Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator. a) Worksite, 149 Denton Ave. New Hyde Park NY - Employees required to wear Miller LPR 100 half faced respirators were not medically evaluated; on or about 7/1/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 F02
- Issued
- Dec 28, 2015
- Abate by
- Jan 25, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting face piece respirators were not fit tested prior to initial use of the respirator: a) Worksite, 149 Denton Ave. New Hyde Park NY - Employees required to wear Miller LPR 100 half faced respirators were not fit tested; on or about 7/1/15. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340746635.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.